Python 991 - Manual (Page 30)

30 © 2008 Directed Electronics. All rights reserved.
4URN 2.
slowly four times.
Note:
The Bitwriter can change the amount of times the remote start activates
and, it can change the intervals between activations in timer mode.
Turbo Timer mode
Short run turbo mode keeps the engine running after arriving at your
destination for a programmable period of 1, 3, 5 or 10 minutes. This
allows the system’s timer to conveniently cool down the turbo after you
have left the vehicle.
To activate Turbo Timer Mode with an automatic transmission:
Make sure the Turbo timer feature is turned on in the features 1.
grid.
Open the vehicle door.
2.
While the vehicle is running; press the 3. button twice followed
by the button.
The parking lights flash once and the remote plays the remote start 4.
activation tone confirming that the remote start is activated (the one
way remote only flashes the parking lights).
Turn off the ignition (car stays running).
5.
%XIT 6.
At this point the vehicle stays running for the programmed run- 7.
time.
To activate turbo timer mode with a manual transmission:
Enter MTS mode with the door open. 1.
Transmit the timer mode feature with the remote by pressing 2. two-
times, and then .
!FTER 3.
running for the programmed runtime. (The remote start feature is