Philips A3980 - Manual

AJ 3980 AJ 3980 CD Clock Radio
Read this manual first!
If you have any problems, do not attempt
to return this product to the store.
For fast help, call us first!
1-800-531-0039 S E E W HY INS I D E
IM
PO RTAN
T ! Return
your Warranty
Registration Card within 10 days
6
7
8
9
0
!
@
%
1 2 3 4 5
#
$
^ &
Printed in China
W
CLASS 1
LASER PRODUCT
AJ3980
Meet Philips at the Internet
http://www.philips.com
SETTING THE CLOCK AND ALARM TIMES
MEMORY BACKUP
The memory backup conveniently allows your clock,
alarm and radio presets to be stored for up to 3
minutes when there is a power interruption e.g. AC
power failure. The complete CD clock radio and display
will be switched off. As soon as the power supply
returns, the display will indicate the correct time.
• If power supply returns
after 3 minutes, you will
need to re-enter the clock and alarm time settings.
CONNECTING HEADPHONES
Connect headphones with a 3.5 mm plug into the p jack.
=The built-in speaker will now be muted on the set.
DISPLAY BRIGHTNESS
In the dim / medium setting, the backlight is interactive
and gently fades in and out whenever you press a touch
screen control.
There are 3 settings:
bright ➟ medium ➟ dim
• Press REPEAT ALARM/ BRIGHTNESS CONTROL once or more.
SETTING THE CLOCK TIME (see figure 3)
The time is displayed using the 12 hour clock where the
PM indicator lights up (on = PM, off = AM).
1. In the standby mode, press TIME SET to activate
the clock setting mode.
=The current clock time in the main display flashes.
2. Press HOUR / MINUTE to adjust the hours and
minutes respectively.
• With your finger held down on HOUR / MINUTE, the
display will increase the hours / minutes rapidly and
continuously.
• Press HOUR / MINUTE briefly and repeatedly to
adjust the time slowly.
3. Press TIME SET again when you have reached the
correct time.
=You will hear a double beep to confirm the time
setting.
SETTING THE ALARM (see figure 3)
GENERAL
Two different alarm times, ALARM 1 and ALARM 2
can be set in the CD
/ radio / buzzer
modes.
This can be useful when for example you need to be
woken up at a different time during the week and at the
weekend.
SETTING THE ALARM TIME
1. In the standby mode, press ALARM 1 / ALARM 2
to select the alarm mode. Check the respective
icon appears in the display: CD
radio /
buzzer .
Either press briefly:
• ALARM 1 once for CD alarm
. This enables
CD playback from the first track as your alarm call.
• ALARM 2 once or more for radio / buzzer
alarm.
2. Press SET AL 1 or SET AL 2 to activate the alarm
setting mode.
=The current alarm time display flashes.
3. Press HOUR/ MINUTE to adjust the hours and
minutes respectively.
• With your finger held down on HOUR/ MINUTE,
the display will increase the hours / minutes
rapidly and continuously.
• Press HOUR/ MINUTE briefly and repeatedly to
adjust the time slowly.
4. Press SET AL 1 or SET AL 2 again when you
have reached the correct time.
=You will hear a double beep to confirm the time setting.
GENTLE WAKE VOLUME
A sure way of getting up in the mornings, the gentle
wake volume for the alarm begins from a fixed gentle
volume (10) and gradually increases to a maximum
higher setting of ( 25.)
• The default low volume is uo : 10, and the
maximum volume is uo : 25.
• During the alarm call, if you press + / - VOLUME,
the volume stops automatically getting louder.
CONTROLS (see figure 1)
1SLEEP TIMER - adjusts timer options for CD / radio
- switches CD / radio on.
2CD - starts CD playback
3RADIO - switches on radio
4TIME / ALARM
- switches off CD / radio
- selects clock display
5WAKE-UP TRACK - programs your favorite CD
track for wake-up track alarm.
6PUSH TO OPEN - push this corner to open CD door
7DAILY ALARM RESET - stops the active alarm for
24 hours
8+ / - VOLUME - adjusts the volume
9REPEAT ALARM/ BRIGHTNESS CONTROL
- switches off the alarm for a 9 minute period
- switches off timer function
- changes the brightness of the display window
0Main display
- shows clock time and function status
- shows radio frequency and CD track number
briefly when respective function is in use
!Alarm time display - shows the alarm time and the
chosen alarm activated:
- CD
(AL 1 TIME), radio / buzzer
(AL 2 TIME)
@ALARM 2
- selects radio / buzzer alarm
- switches radio / buzzer alarm on/ off
#Touch Screen Controls
Clock controls shown in standby mode. The radio / CD
controls appear when the radio / CD is switched on.
SET AL 1 - sets CD alarm time
HOUR - adjusts hour setting
TIME SET - sets clock time
MINUTE - adjusts minute setting
SET AL 2 - sets radio / buzzer alarm
CD:
- starts / pauses CD playback
- stops CD playback
/ - skips to the next / previous CD tracks
- fast search within a track
Radio:
TUNING
/ (up / down)
- tunes to radio stations automatically/ manually
PRESET 1 - 5 -
to select / store a radio preset station
BAND - selects waveband (FM/AM).
$ALARM 1
- selects CD alarm
- switches CD alarm on/ off
%p - 3.5 mm jack for headphones
^Coil antenna - improves FM reception
&Power cord
INSTALLATION (see figure 2)
AC Power Supply
1. Check if the power voltage, shown on the type plate
on the bottom of the set, corresponds to your
power supply. If it does not, consult your dealer or
service center.
2. Connect the plug to the wall outlet.
...PH...IL..IPS scrolls across the display continuously.
• To exit the demo mode, press any button on the
set.
Eg. TIME / ALARM
SLEEP TIMER
RADIO
CD
3. To disconnect the set completely from the power
supply, withdraw the plug from the wall outlet.
Standby power consumption (clock mode)....1.5W
The serial and production number are located
on the bottom of the set.
CD / RADIO OFF
CD / RADIO OFF
English CONTROLS/ INSTALLATION Return your Warranty Registration card today to
ensure you receive all the benefits you’re entitled to.
• Once your Philips purchase is registered,
you’re eligible to receive all the privileges
of owning a Philips product.
• So complete and return the Warranty
Registration Card enclosed with your
purchase at once, and take advantage
of these important benefits.
Warranty
Verification
Registering your product
within 10 days confirms
your right to maximum
protection under the
terms and conditions of
your Philips warranty.
Owner
Confirmation
Your completed Warranty
Registration Card serves
as verification of owner-
ship in the event of prod-
uct theft or loss.
Model
Registration
Returning your Warranty
Registration Card right
away guarantees you’ll
receive all the information
and special offers which
you qualify for as the
owner of your model.
This “bolt of lightning” indi-
cates uninsulated material
within your unit may cause an elec-
trical shock. For the safety of every-
one in your household, please do not
remove product covering.
The “exclamation point” calls
attention to features for
which you should read the enclosed
literature closely to prevent operat-
ing and maintenance problems.
WARNING: TO PREVENT FIRE
OR SHOCK HAZARD, DO NOT
EXPOSE THIS EQUIPMENT TO
RAIN OR MOISTURE.
CAUTION: To prevent electric
shock, match wide blade of plug to
wide slot, and fully insert.
For Customer Use
Enter below the Serial No. which is locat-
ed on the rear of the cabinet. Retain this
information for future reference.
Model No. ________________________
Serial No. ________________________
Know these ssa affe etty y
symbols
C A U T I O N
RISK OF ELECTRIC SHOCK DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
MAC5097
– If CD playback is paused for more than 15
minutes and no controls are pressed, the set
automatically goes to standby mode.
SELECTING A DIFFERENT TRACK DURING PLAYBACK
The track number appears briefly in the display when
you press
or to skip tracks.
• Press once or more to skip to the next track(s).
• Press more than once to skip to previous tracks
• Press once and playback will return to the
beginning of the current track.
FINDING A PASSAGE WITHIN A TRACK
1. During playback, press and hold or
=The CD is played at high speed and low volume;
the display will show 'Cd:' and your
current track number.
2. Release or when you recognize the
passage you want. =Normal CD playback and standby clock time
resumes.
RADIO RECEPTION (see figure 6)
1. Press the RADIO button to switch on the radio. =Radio touch screen controls appears throughout
radio operation =The radio frequency and waveband appears in the
display for 10 seconds before reverting back to the
clock display.
2. Press the BAND button to select your waveband
FM/AM.
3. Tune to your station manually or automatically
by using / (up / down).
To improve reception :
FM : extend the coil antenna fully at the back of the
set for optimum reception.
AM : uses a built-in antenna. Direct the antenna by
adjusting the position of your set.
4. Adjust the sound using the + / - VOLUME.
5. To switch off the radio, press the TIME/ALARM
button.
TUNING TO A STATION (see figure 6)
Manual tuning:
1. Press / briefly to find your station. Repeat
until you have found the desired station.
Automatic tuning:
• Press and hold
/ until the display
frequency starts to change frequency.
• When a station of sufficient strength has been
found, tuning will stop. Or you can stop the
automatic tuning search by pressing either
/ again. Repeat until you have found
the desired station.
PRESET STATIONS (see figure 6)
Storing preset stations
You can program up to five radio stations for each band.
If you like, you can also replace a preset station with
another frequency. The current station will be indicated
by a square round the preset number in the display.
E.g.
1. Tune to your desired station (see RADIO
RECEPTION).
2. As soon as you have found your station, press and
hold a preset number 1-5. Release the number
when you hear a double beep confirming that the
station has now been set.
Selecting preset stations
• Select and press a preset number, 1-5.
SLEEP TIMER (see figure 7)
About SLEEP TIMER
This feature is a built-in timer device which enables
the set to be automatically switched off during CD /
radio playback, after a set period of time. There are
three timer options: 60 , 30 and 15 minutes.
Setting SLEEP TIMER
1. Press the SLEEP TIMER button rapidly once or
more to select your timer options: 60 , 30 and 15
minutes.
=The display will show S SL L:: and the timer options
briefly. = appears when the timer is active.
2. To cancel the timer, you can either press:
• TIME/ALARM
• REPEAT ALARM/ BRIGHTNESS CONTROL
CD / RADIO OFF
1
CD / RADIO OFF
CD / RADIO SLEEP TIMER ALARM CD
SELECTING CD WAKE-UP ALARM MODE
You can program and select a CD track number
between 1-99, when the set is in the standby or radio
playback mode.
However, if the track number programmed does not
exist on your CD, the CD will start playback from the
first track during the alarm call.
1. Set the alarm time for AL1 TIME.
2. Insert a CD into the CD compartment.
3. Press ALARM 1 to select CD alarm mode.
4. Press WAKE-UP TRACK to activate favorite
track programming.
5. Press or until the desired track number
is shown.
6. Press WAKE-UP TRACK to confirm the selected
track number. = The display returns to standby clock time.
7. If you want to review your programmed track
number, press WAKE-UP TRACK.
IMPORTANT!
The buzzer alarm option will automatically
replace the CD alarm if you have:
– inserted a CD incorrectly;
– inserted a damaged CD;
– forgotten to insert any CD;
– not closed the CD door properly.
SWITCHING OFF THE ALARM (see figure 4)
There are three ways of switching off the alarm.
Unless you cancel the alarm completely, the DAILY
ALARM RESET option will be automatically select-
ed after 59 minutes, from the time your alarm time
first sounds.
DAILY ALARM RESET
If you want the alarm mode to be stopped
immediately but also wish to retain the same alarm
setting for the following day:
• Press and hold DAILY ALARM RESET
=You will hear a beep tone to confirm that the alarm
reset has been activated.
REPEAT ALARM
This will repeat your alarm call at 9 minute intervals.
• During the alarm call, press REPEAT ALARM/
BRIGHTNESS CONTROL .
• Repeat as often as desired.
= Your alarm mode indication , , will
flash throughout the time the repeat alarm is
active.
CANCELLING THE ALARM COMPLETELY
When an alarm is cancelled this is shown by the
selected alarm indication and symbol disappearing
from the display.
To cancel the set alarm time
before it goes off:
• Press ALARM 1 or ALARM 2 until the alarm icons
/ / disappears from the display.
CD PLAYBACK (see figure 5)
1. Insert a CD with the printed side facing up, and
close the door.
2. Press the CD button to start playback.
=Display shows: 'Cd: --' and the total number of
tracks, then your current track number, before
returning to clock time
=CD touch screen controls appears throughout CD
operation.
Other possible CD indications before return-
ing to clock time:
=door is shown if the CD door is not closed.
=noCd is shown if no CD has been inserted /
inserted incorrectly. =nFCd is shown if the CD-R(W) is non-finalized
=Err indicates a general error in operation of the set.
3. Adjust the sound with +/- VOLUME.
4 To interrupt, press
= flashes.
5. Press again to resume playback.
6. Press to stop playback. Or press TIME /
ALARM to return to
standby mode.
CD / RADIO OFF
CD
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings.
Install in accordance with the manu-
facturer´s instructions.
8. Do not install near any heat sources
such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that
produce heat.
9. Do not defeat the
safety purpose of
the polarized or
grounding-type plug. A polarized plug has two
blades with one wider than the other. A
grounding type plug has two blades and a
third grounding prong.The wide blade or the
third prong are provided for your safety. If the
provided plug does not fit into your outlet,
consult an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being
walked on or pinched, particularly at plugs,
convenience receptacles, and the point where
they exit from the apparatus.
11. Only use attachments/accessories spec-
ified by the manufacturer .
12. Use only with the cart, stand,
tripod, bracket, or table specified
by the manufacturer or sold with
the apparatus. When a cart is
used, use caution when moving
the cart/apparatus combination to
avoid injury from tip-over.
13. Unplug this apparatus during lightning
storms or when unused for long periods of
time.
14. Refer all servicing to qualified service per-
sonnel. Servicing is required when the appara-
tus has been damaged in any way, such as
power-supply cord or plug is damaged, liquid
has been spilled or objects have fallen into
the apparatus, the apparatus has been
exposed to rain or moisture, does not oper-
ate normally, or has been dropped.
15. Battery usage CAUTION – To prevent
battery leakage which may result in bodily
injury, property damage, or damage to the
unit:
● Install all batteries correctly, + and - as
marked on the unit.
● Do not mix batteries (old and new or car-
bon and alkaline, etc.).
● Remove batteries when the unit is not used
for a long time.
EL 6475-E004: 02/8
Continuous crackling/ hiss disturbance during
AM broadcast
– Electrical interference from TVs, computers,
fluorescent lamps, etc.
• Move set away from other electrical equipment
The alarm does not function
– Alarm mode not selected
• See chapter on SETTING THE ALARM
– Alarm time not set
• See chapter on SETTING THE ALARM.
MAINTENANCE TROUBLESHOOTING
General (see figure 8)
• If you do not intend to use the set for a long time,
withdraw the plug from the wall outlet.
• Do not expose the set, to humidity, rain, sand or
excessive heat caused by heating equipment or
direct sunlight.
• To clean the set, use a soft, dry cloth. Do not use
any cleaning agents containing alcohol, ammonia,
benzene or abrasives as these may harm the
product’s surface.
CD player and CD handling (see figure 9)
• The lens of the CD player should never be touched!
• Sudden changes in the surrounding temperature
can cause condensation to form and the lens of
your CD player to cloud over. Playing a CD is then
not possible. Do not attempt to clean the lens but
leave the set in a warm environment until the
moisture evaporates.
• Always shut the CD door to keep the CD
compartment dust-free. To clean, dust the
compartment with a soft dry cloth.
• To clean the CD, wipe in a straight line from the
center towards the edge using a soft, lint-free
cloth. Do not use cleaning agents as they may
damage the disc.
• Never write on a CD or attach any stickers to it.
If a fault occurs, first check the points listed
below before taking the set for repair.
If you are unable to remedy a problem by
following these hints, consult your dealer or
service center.
WARNING:
Do not open the set as there is a risk of electric
shock! Under no circumstances should you try
to repair the set yourself, as this will invalidate
the warranty.
No sound
– Volume not adjusted
• Adjust the VOLUME
–
Headphones are connected
• Disconnect headphones
No reaction to any operation of the bottons
– Electrostatic discharge
• Disconnect the set from the power supply and
reconnect the set after 5 minutes.
CD playback does not work
– CD badly scratched or dirty
• Replace/ clean CD
–
Laser lens steamed up
• Wait until lens has adjusted to room temperature
–
Laser lens dirty
• Clean lens by playing a CD lens cleaning disc
–
CD-R(W) is non-finalized
• Use a finalized CD-R(W)
Occasional crackling sound during FM
broadcast
– Weak signal
• Extend coil antenna fully
Environmental information
All unnecessary packaging material has been omit-
ted. We have done our utmost to make the packag-
ing easily separable into 2 materials: paper pulp,
polyethylene.
Your set consists of materials which can be recycled
if disassembled by a specialized company.
Please observe local regulations on the disposal of
packing materials and old equipment.
CAUTION
Use of controls or adjustments or
performance of procedures other than
herein may result in hazardous
radiation exposure or other unsafe
operation.
1
Alarm time display
If you have set both alarms, the standby alarm time
display will show the alarm time which is ready to go
off first, according to the current clock time.
E.g. if current clock time = 7:30
AL2 TIME = 6:20
AL 1 TIME = 7:45,
the standby alarm display shows the alarm time, 7:45.
Helpful Tip :
If you want the alarm to wake you up, FIRST
CHECK:
-
you have disconnected the headphones.
- radio alarm : make sure you have tuned
properly to a station.
Helpful Tip
During an alarm call/ repeat alarm, only the
DAILY ALARM RESET, REPEAT ALARM/ BRIGHT-
NESS CONTROL and ALARM 1 or ALARM 2 and +
/ - VOLUME
controls on the set will operate.
Helpful Tip :
In the CD stop position, the CD touch screen
display remains active for 5 minutes.
• Press to start playback again if you have
stopped briefly e.g. to change a CD.
AJ3980 CD Clock radio
English
Français
Español
PHILIPS CONSUMER ELECTRONICS
NORTH AMERICA
Knoxville, Tennessee 37914-1810, U.S.A.
PORTABLE AUDIO
One Year Free Exchange
This product must be carried in for an exchange.
LIMITED WARRANTY
WHO IS COVERED?
You must have proof of purchase to exchange the prod-
uct. A sales receipt or other document showing that you
purchased the product is considered proof of purchase.
Attach it to this owner’s manual and keep both nearby.
WHAT IS COVERED?
Warranty coverage begins the day you buy your product.
For one year thereafter, a defective or inoperative prod-
uct will be replaced with a new, renewed or comparable
product at no charge to you. A replacement product is
covered only for the original warranty period.When the
warranty on the original product expires, the warranty
on the replacement product also expires.
WHAT IS EXCLUDED?
Your warranty does not cover:
•
labor charges for installation or setup of the prod-
uct, adjustment of customer controls on the prod-
uct, and installation or repair of antenna systems
outside of the product.
• product repair and/or part replacement because of
misuse, accident, unauthorized repair or other cause
not within the control of Philips.
• reception problems caused by signal conditions or
cable or antenna systems outside the unit.
• a product that requires modification or adaptation to
enable it to operate in any country other than the
country for which it was designed, manufactured,
approved and/or authorized, or repair of products
damaged by these modifications.
• incidental or consequential damages resulting from
the product. (Some states do not allow the exclusion
of incidental or consequential damages, so the above
exclusion may not apply to you.This includes, but is
not limited to, prerecorded material, whether copy-
righted or not copyrighted.)
• a product used for commercial or institutional pur-
poses.
WHERE IS EXCHANGE AVAILABLE?
You may exchange the product in all countries where
the product is officially distributed by Philips. In countries
where Philips does not distribute the product, the local
Philips service organization will attempt to provide a
replacement product (although there may be a delay if
the appropriate product is not readily available).
BEFORE REQUESTING EXCHANGE...
Please check your owner's manual for assistance. If you
have additional questions, call us at 1-800-531-0039.
EXCHANGING A PRODUCT IN U.S.A.,
PUERTO RICO, OR U.S.VIRGIN ISLANDS...
Contact 1-800-531-0039 to arrange an exchange. Or,
ship the product, insured and freight prepaid, and with
proof of purchase enclosed, to the address listed below.
Philips Exchange Program Suite A
406 North Irish Street
Greeneville TN 37745
(In U.S.A., Puerto Rico, and U.S.Virgin Islands, all implied
warranties, including implied warranties of merchantability
and fitness for a particular purpose, are limited in duration
to the duration of this express warranty. But, because some
states do not allow limitations on how long an implied war-
ranty may last, this limitation may not apply to you.)
EXCHANGING A PRODUCT IN CANADA...
Please contact Philips at:
1-800-661-6162 (French Speaking)
1-800-531-0039 (English or Spanish Speaking)
(In Canada, this warranty is given in lieu of all other war-
ranties. No other warranties are expressed or implied,
including any implied warranties of merchantability or fit-
ness for a particular purpose. Philips is not liable under
any circumstances for any direct, indirect, special, inciden-
tal or consequential damages, howsoever incurred, even
if notified of the possibility of such damages.)
REMEMBER...
Please record below the model and serial numbers found
on the product. Also, please fill out and mail your war-
ranty registration card promptly. It will be easier for us
to notify you if necessary.
MODEL # __________________________________
SERIAL # __________________________________
EL6095T004 / 8-02
This warranty gives you specific legal rights.You may have other rights which vary from state/province to state/province.
Philips, P.O. Box 520890, Miami, FL 33152, USA, (402) 536-4171
IMPORTANT SAFETY INSTRUCTIONS
This product complies with the FCC-Rules, Part 15 and with 21 CFR 1040.10. Operation is subject to
the following two conditions:
1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause unde-
sired operation.
L'appareil répond aux normes FCC, Part 15 et 21 CFR 1040.10. Fonctionnement soumis aux deux
conditions suivantes:
1. Cet appareil ne doit pas provoquer d'interférences nuisibles, et
2. Cet appareil doit accepter toute interférence reçue, y compris les interférences susceptibles de
provoquer un fonctionement peu satisfaisant.
El aparato cumple las normas FCC, Parte 15 y 21 CFR 1040.10. Funcionamiento dependiente de dos
condiciones siguientes:
1. Este aparato no puede provocar interferencia dañina, y
2. Este aparato debe aceptar cualquier interferenciarecibida, incluyendo las interferencias que
puedenprovocar un funcionamiento insuficiente.
Canada
English:
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as
set out in the Radio Interference Regulations of the Canadian Department of Communications.
Français :
Cet appareil numérique n'émet pas de bruits radioélectriques dépassant les limites applicables aux appareils
numériques de Classe B prescrites dans le Règlement sur le Brouillage Radioélectrique édicté par le Ministère
des Communications du Canada.
NOTES
AC Polarized
Plug
REPEAT ALARM
BRIGHTNESS CONTROL
SLEEP TIMER WAKE -UP TRACK
CD RADIO TIME / ALARM
DAILY ALARM
RESET
VOLUME
PUSH TO OPEN
CD / RADIO OFF
2
TIME
ALARM 1 ALARM 2
SET AL 1 HOUR TIME SET MINUTE SET AL 2
AL 1 TIME
PM
PRESET
3
4
CD
C D
TIME AL 2
REPEAT ALARM BRIGHTNESS CONTROL
SLEEP TIMER WAKE - UP TRACK
CD RADIO TIME / ALARM
DAILY ALARM
RESET
VOLUME
CD / RADIO OFF
BAND
RADIO F M
TUNING PRESET
1 2 3 4 5
RADIO
TIME AL 2
PM
REPEAT ALARM
BRIGHTNESS CONTROL
SLEEP TIMER WAKE - UP TRACK
CD RADIO TIME / ALARM
DAILY ALARM
RESET
VOLUME
CD / RADIO OFF
5
6
SLEEP TIMER
BAND
RADIO F M
TUNING PRESET
1 2 3 4 5
TIME AL 2
PM
AL 1 TIME
SLEEP
REPEAT ALARM BRIGHTNESS CONTROL
SLEEP TIMER WAKE - UP TRACK
CD RADIO TIME / ALARM
DAILY ALARM
RESET
VOLUME
CD / RADIO OFF
7
X
8
9
NOTES
aj3980/17 1/9/03 10:08 AM Page 1