Pride Mobility PMV5000 - Manual (Page 33)

33 Hurricane PMV/RevK/Mar03 www.pridemobility.com
V I I I . C O M F O R T A D J U S T M E N T S
Figure 16A. Seatback Hinge
Figure 17. Power Seat Actuator
(Optional)
POWER SEAT ACTUA-
TOR
WARNING! The power seat is intended for
operation only while your PMV is
stationary and on a level surface. Its
purpose is to aid you in reaching objects.
Strict adherence to the following safety
rules is vital to your safety:
n
Do not attempt to raise or lower the
seat while in motion!
n
Operate the power seat only on level
ground.
n
Do not operate your PMV with the
power seat elevated.
n
It is recommended that the PMV be
driven only with the seat in the lowest
position.
Raising and lowering the power seat when
traveling or when on an incline could
cause the PMV to tip over, resulting in
serious injury and/or PMV damage. Keep
the power seat in its lowest position when
traveling or when on an incline.
SEATBACK ADJUSTMENT
The seatback may be positioned to four
different angles: 90°, 100°, 102° and
105°. See figure 16A.
To adjust the seatback angle:
1. Loosen and remove the adjustment
screw from the seatback hinge on
both sides of the seat.
2. Reposition the seatback to the desired
angle.
3. Align the adjustment holes from the
upper and lower hinge, so the adjust-
ment screw can easily pass through.
4. Reinsert both adjustment screws and
tighten.
POWER SEAT (OPTIONAL)
Your Hurricane PMV may be equipped with a power seat actuator, which raises and lowers the seat automatically.
See figure 17.
90° ADJUSTMENT HOLE
100° ADJUSTMENT HOLE
102° ADJUSTMENT HOLE
105° ADJUSTMENT HOLE
ADJUSTMENT SCREW
UPPER HINGE
LOWER HINGE