Planar ICEBrite EL VGA Displays EL640.480-AM - Manual (Page 7)

EL640.480-AM Operations Manual (020-0351-00C) 5
Cable Length
The maximum recommended cable length is 600 mm (24 in.). Longer cables
may cause data transfer problems between the data transmitted and the
display input connector. Excessive cable lengths can pick up and source
unwanted EMI. There are third party products which allow this maximum cable
length to be exceeded. Contact Planar Application Engineering for more
information.
Cleaning
As with any glass or coated surface, care should be taken to minimize
scratching. Clean the display glass with mild, water-based detergents only.
Apply the cleaner sparingly to a soft cloth, then wipe the display. Disposable
cleaning cloths are recommended to minimize the risk of inadvertently
scratching the display with particles embedded in a re-used cloth. Particular
care should be taken when cleaning displays with anti-glare and anti-reflective
films.
The TAB (tape-automated bonding) leads between the electronics and the
display glass are very sensitive to handling. When cleaning the edges of the
display glass, special care should be taken not to damage the leads.
Avoiding Burn-In
As with other light emitting displays, displaying fixed patterns on the screen
can cause burn-in, where luminance variations can be noticed. Use a screen
saver or image inversion to avoid causing burn-in on the display.