Troubleshooting – Polaroid FLM-1507 User Manual

Page 19

Advertising
background image

19

TROUBLESHOOTING

Before calling our customer care number, please check the following table to see if the below

mentioned symptoms can be diagnosed and fixed.

Symptoms Possible

Reasons

Correction

No picture, no sound,
and no indicator light
on

1.The power adapter is not

plugged in

2.The power is off

1.Plug the power adapter in
2.Turn the power on

No picture, no sound,
but the green light
indicator

Functions of On/Off Time and

Sleep have been set

Press to turn on the TV

No picture, no sound,
but the yellow light
indicator

1.PC is in D-sub Mode without

any PC signal input

2.The signal cable is not

connected correctly


1.Press or input the PC signal
2.Connect the signal cable

properly

Picture and sound
are abnormal

1.Contrast, sharpness, and

color are set improperly

2.Color system is set improperly
3.Sound system is set
improperly

1.Adjust the value of Contrast,

sharpness, and color

2.Set the Color system to the

country broadcasting standard

3.Set the Sound system to the

country broadcasting standard

Picture is spotted or
has “snow”

Signal source is low-grade;
The signal is in a lower quality;
No signal input

Use a high quality signal cable;
Connect an input signal

Blue background in
AV mode

No Video signal or the signal
cord is improperly/not
connected

Connect the signal cord properly

Picture is unclear, or
moves or has
horizontal black
stripes in PC mode

Picture is not well adjusted

Adjust automatically by selecting
Auto Adjust or adjust Clock
Phase, H Position and V Position
manually in the PC Setup menu

PC Picture is not in
the middle of the
screen

Picture is not well adjusted

Adjust picture automatically by
resetting H Position, V Position,
Phase and Clock

No sound

No Audio signal or the signal
cord is improperly/not
connected

1.Connect the audio signal cord

properly

2.Set the sound system properly

The remote control
does not work

Batteries are improperly
installed or exhausted

1. Check the positive and the

negative battery polarities

2. Check if the batteries are loose
3.Replace the batteries

Advertising