Panasonic DP-7000 - Manual (Page 12)

x
Warnings alert you to potential hazard that could result in serious injury or death.
Cautions alert you to operations that may result in minor injury or damage to the
machine.
This symbol is used to alert operators to a specific operating
procedure that requires close attention. Read and follow
instructions carefully to ensure the task is accomplished safely.
This symbol is used to alert operators to a specific operating
procedure that must not be performed. Read and follow
instructions carefully.
This symbol is used to alert operators to a specific operating
procedure that should be emphasized for operating safety.
Read instructions carefully before performing the required
procedure.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Safety Notes
Read these safety notes carefully before using this product to ensure that you operate the machine properly.
This section explains the graphic symbols used throughout this guide.
Precautions for Installation and Relocation
Do not place the machine in a hot, humid, dusty,
or poorly ventilated environment. Prolonged
exposure to these adverse conditions can cause
fire or electric shocks.
Do not place the machine near heaters or
volatile, flammable, or combustible materials
such as curtains that may catch fire.
Place the machine on a level and sturdy surface
that can withstand the machine weight of 418 lbs
or 190 kg If tilted, the machine may fall over and
cause injuries.
When relocating the machine, contact your local
authorized Panasonic service representative.
The machine has ventilation holes on its bottom.
A poorly ventilated machine can cause
excessive internal heat and fire.
The accompanying diagram shows the minimum
clearances required for normal operation,
consumable replacement, and maintenance to
ensure your machine operates at peak
performance. Your authorized Panasonic
representative will provide necessary support for
the proper installation of the machine.