Panasonic PT-F200EA User Manual
Page 4
Original Lamp Drive System for
Optimal Lamp Performance
Lamps used in a projector require much higher precision than
ordinary household lamps. Panasonic employs a number of new
technologies—including an original lamp drive system—that help
maintain optimal lamp performance for longer-lasting brightness.
This has resulted in a 5,000-hour* lamp replacement cycle.
*
The value given above does not imply a guaranteed amount of time.
The value may vary considerably depending on usage conditions.
Daylight View 4 Technology:
Remarkable Detail with Enhanced
Perception of Brightness and Contrast *
The PT-F200 series feature
Panasonic’s Daylight View 4 technol-
ogy. Sharp edges are achieved with
the new “Edge Enhancer Control”
and "Gamma Curve Control."
Remarkable detail is provided and
perceived brightness and contrast
are enhanced, so images appear
crisp, vivid, 3-dimensional and easy to see even in brightly lit
rooms. Daylight View 4 also includes a built-in ambient light
sensor that automatically detects room brightness and adjusts
operation accordingly.
* There is no actual change in the rated brightness or contrast ratio.
Wide 2x Zoom and Horizontal/Vertical Lens Shift Give
You More Installation Flexibility
Each can project a 120-inch image from any distance between
3.6 m (11.8 feet) and 7.2 m (23.6 feet). In new installations,
this lets you accommodate a wide range of room sizes and
shapes. And when replacing existing projectors, the new 2x
zoom greatly expands your installation flexibility.
Wired LAN: Web Browser Control/Monitoring, E-Mail
Message Alert (PT-F200NTEA)
Anybody can operate the PT-F200NTEA by remote control or
monitor its status over a LAN network, because it is all done
using the computer’s familiar web browser. Furthermore, the
projector sends an e-mail message to notify the operator when
an error has occurred, or a lamp needs to be replaced.
PJLink
™
compatibility (PT-F200NTEA)
The LAN terminals support
PJLink
™
class 1 connection.
Control with the same specifica-
tions is also possible when used in
a multi-projector system with pro-
jectors of another brand.
Direct Power Off
Because the cooling fan keeps operating until the lamp is
cooled, you can turn off the room’s main power without waiting
for the projector to cool down.
Easy Lamp Replacement from the Rear
For easier maintenance, you can replace the
lamp from the rear. The lamp is easily
replaced even after the projector is installed
on the ceiling.
Simulated image with
Daylight View 4 turned
on. Detail, depth,
brightness and contrast
over the entire image
are enhanced.
Simulated image with
Daylight View 4 turned
off. Overall contrast
appears lower, and
images in dark areas
are blackened.
Internet
LAN
LAN
PC
PC
PC
PC
PC
PT-F200NTEA
Remote Control
L A N
PC
PC
PC
Company C
controller
Company A
projector
Company B
projector
PT-F200NTEA
7.2 m/23.6 feet
120-inch screen
3.6 m/11.8 feet
Ambient light
sensor (ALS)
Daylight View 4 Concept
Daylight View
circuit
LCD panels
Projector
3
C
O N V E N I E N T
F
E A T U R E S F O R
F
I X E D
I
N S T A L L A T I O N