Pandigital UGPI7000W01 User Manual
Page 32
32
Set the Clock
1.
On the Calendar/Clock screen, press SETUP.
2.
Use ▲ / ▼ to highlight Set Clock and then press ENTER.
3.
Use ◄ / ► to move between the Time and Date fields, and use
▲ / ▼ to change the value in the selected field.
4.
When the date and time are correct, press ENTER to save and return
to the normal Calendar/Clock screen.
Set the Alarm
You can use your DPF as an alarm clock, and you can set the alert as either
a built-in tone or music. You can also set the alarm to alert only once or daily.
1.
On the Calendar/Clock screen, press SETUP.
2.
Use ▲ / ▼ to highlight Set Alarm and then press ENTER.
3.
Use ◄ / ► to move between the Time, OFF/Once/Daily, and
Tone/Music fields, and use ▲ / ▼ to change the value in the selected
field.
4.
When the alarm is set as desired, press ENTER to save and return to
the normal Calendar/Clock screen.