Panasonic TC-32LX300 - Manual (Page 13)

13
AV IN
R L
AUDIO
HDMI AUDIO IN
HDMI IN
HDMI OUT L R
VIDEO
P R
R L
1
2
1
2
P B Y
AUDIO
COMPONENT VIDEO
VIDEO S-VIDEO
INPUT
AUDIO OUT INPUT
HDMI
AUDIO IN
AUDIO
OUT
1 2
Connections
HDMI∗ 1 (High Definition Multi media Interface) is the first all-digital consumer electronics A/V interface that supports
uncompressed standard. The HDMI terminal supports both video and audio information.
An EIA/CEA-861/861B∗
2 -compliant device, such as a Set-Top Box or DVD player with HDMI or DVI output terminal can be
connected to the HDMI input terminal.
HDMI Connection
∗ 1. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of
HDMI Licensing LLC.
∗ 2. EIA/CEA-861/861B profiles compliance covers profiles for transmission of uncompressed digital video
including high bandwidth digital content protection.
∗ 3. HDMI-DVI conversion cable (TY-SCHO3DH): available on Panasonic website (www.panasonic.com). Consult
your consumer electronics dealer for availability.
Notes:
• This input terminal is not intended for use with computers.
• 720p/1080i signals will be re-formatted to view on your LCD display.
Notes:
• This HDMI connector is Type A.
• If you connect equipment without a digital output terminal, connect to the COMPONENT VIDEO, S-VIDEO or
VIDEO input terminal on the TV so you can receive an analog signal.
• The HDMI IN terminal can only be used with 720p, 1080i, 480i or 480p picture signals. Set the Digital Set -Top Box
DIGITAL OUT terminal Output setting to 720p, 1080i, 480i or 480p. For detailed information, refer to the Digital Set
-Top Box instruction manual. If you cannot display the picture because your Digital Set -Top Box does not have a
DIGITAL OUT terminal Output setting, use the component Video Input (or the S-Video Input or Video Input). In this
case the picture will be displayed as an analog signal.
Compatible VIDEO Signal
Compatible sampling freguency of AUDIO signal through HDMI (L.PCM) : 48 kHz / 44.1 kHz / 32 kHz
Set-Top Box
DVD player
Audio cable
HDMI cable
Example of HDMI input signal source
• If the external device has DVI output only, use a DVI to HDMI adapter cable∗ 3 to connect to the
HDMI terminal.
• Connect the audio cables to the AUDIO IN terminals when using a DVI to HDMI adapter cable.
• Select the audio setting in HDMI In (see page 23).
720p
1080i
480p
480i
No. of dots (H Ч Ч Ч Ч Ч V)
1,280 Ч Ч Ч Ч Ч 720p
1,920 Ч Ч Ч Ч Ч 1,080i
720 Ч Ч Ч Ч Ч 480p
640 Ч Ч Ч Ч Ч 480p
720 Ч Ч Ч Ч Ч 480i
Vertical scanning frequency (Hz)
59.94/60
59.94/60
59.94/60
59.94/60
59.94/60
Ferrite core (supplied)
Attach just beside the connector.
Attaching the ferrite core
Pull back the tabs (in two
places) to open. Put the cable
and close.