Paradyne 3800PLUS - Manual (Page 211)

Index-1 3980-A2-GB30-40 October 1998
Index
A
A/ (Repeat Last Command), 13-3
Abort (Test branch), 7-2
ac power
connection, 2-4
requirements, D-3
Access from Remote, 8-44
Active (Operating) configuration area, 8-1
Active (Saved) configuration area, 8-1
Administrative Password, 11-4, 11-10
Answer, 5-3
Answer Access security, 11-2
Answer Access Security Mode, 8-47
Answer Security, 11-8
any–key abort, 5-2, 13-4, 13-5
Asymmetric Rate Mode
Dial Line, 13-20
Leased Line, 13-20
Async DTE Rate, 8-7
AT Command Mode, 8-18
AT commands
“H (V.42bis Compression), 8-36, 13-17
”L (Disconnect at 300 bps), 13-17
&C (LSD Control), 8-12, 13-8
&D (DTR Action), 13-8
&F (Factory Defaults), 13-9
&G (V.22bis Guard Tone), 8-26, 13-9
&I (Dial Transmit Level), 13-10
&J (Dial Transmit Type), 8-26, 13-10
&L (Leased Mode), 8-28, 13-10
&M (Async/Sync Mode and DTE Dialer Type), 8-7,
8-14, 13-11
&Q (Async/Sync Mode and DTE Dialer Type), 8-7,
8-14, 13-11
&R (RTS Action), 8-11, 13-11
&S (DSR Control), 8-10, 13-11
&T (Test), 13-12
&T0 (Abort Test), 7-2
&T1 (Local Analog Loopback), 7-3
&T2 (Pattern Test), 7-7
&T3 (Local Digital Loopback), 7-5
&T4, &T5 (Receive Remote Loopback Response),
8-41
&T6 (Remote Digital Loopback), 7-4
&T9 (Self-Test), 7-2
&V (View Configuration Options), 13-12
&W (Save to Memory), 13-12
&X (Transmit Clock Source), 8-13, 13-12
&Z (Store Telephone Numbers), 5-5, 13-12
%A (Error Control Fallback Character), 8-37, 13-14
%C (MNP5 Compression), 8-36, 13-15
+FCLASS (Service Class Selection), 13-8
\A (Maximum Frame Size), 8-40, 13-13
\C (Error Control Negotiate Buffer), 8-36, 13-13
\D (CTS Control), 8-11, 13-13
\G (Modem-to-Modem Flow Control), 8-38, 13-13
\K (Break Buffer Control, Send Break Control, Break
Forces Escape), 8-15, 8-38, 8-39, 13-13
\N (Error Control Mode), 8-33, 13-13
\Q (Flow Control of DTE, Flow Control of Modem),
8-37, 13-14
\T (No Data Disconnect Timer), 8-21, 13-14
\X (XON/XOFF Passthrough), 8-38, 13-14
A (Answer Mode), 5-3, 13-3
D (Dial), 5-6, 13-4
DS (Dial Stored Number), 5-2, 13-5
E (Command Character Echo), 8-15, 13-5
echo, C-2
format, 13-2
H (Hook Switch Control), 5-3, 13-5
I (Identification), 6-3, 13-5
L (Speaker Volume), 8-44, 13-5
list of, 13-2
M (Speaker Control), 8-43, 13-5
O (Online mode), 13-5
Q (Result Codes), 8-16, 13-6
Sr? (Display S-Register Value), 13-6
Sr=n (Change S-Register), 13-6
using to change factory presets, 4-11
V (Result Codes Format), 8-17, 13-6
X (Extended Result Codes, Dial Tone Detect, Busy
Tone Detect), 8-16, 8-19, 8-20, 13-7
Y (Long Space Disconnect), 8-21, 13-7
Z (Reset and Load Active), 13-7
AT Escape Character, 8-15
Auto Dial Standby, 8-31
Auto Redial, 8-31, 13-23
S35, 13-22
Auto-Answer Ring Count, 8-19
Automatic Firmware Download Center, 9-6
Automatic Make Busy, 8-22
automatic redialing, 8-18, 8-23, 8-31, 13-23
Automode (Dial Line), 8-25, 13-29
Autorate (Dial Line), 8-25, 13-29
Autorate (Leased Line), 8-29, 13-30