Panasonic SC-VK90D - Manual (Page 29)

29
RQT7125
Sound field/sound quality operations
Change settings
Center Focus
VK90D VK80D
(Discs where the dialogue is recorded in the center channel)
You can make the sound of the center speaker seem like it is coming
from within the television.
Press [SHIFT]+[C.F].
Each time you press the button:
CENTER FOCUS
←→
OFF
•
This does not work when Super Surround is turned on.
•
This will have less effect when Dolby Pro Logic is turned on.
Seat Position
VK90D VK80D
Using this function makes you feel like you are
sitting in the ideal seating position (in the cen-
ter of the circle formed by the speakers), even
if you cannot due to the layout of your room.
During play
1 Press [SHIFT]+[S.POS].
2 Press [8, 9, /, -] to select a position.
Each time you press the button:
SEAT POSITION
←→ OFF
To cancel
Press [SHIFT]+[S.POS] to clear “S.POS”.
Custom Sound Memory—Store the
sound settings
DVD-A DVD-V VCD CD
Store the sound settings for a disc so the unit recalls them the next
time you play it.
•
Number of discs: 30
•
Settings: VK90D VK80D Dolby Pro Logic, Subwoofer level,
Center Focus, Super Surround, Sound EQ, Manual EQ,
Super Sound EQ, Seat Position.
VK70D Advanced Surround, Sound EQ, Manual EQ,
Super Sound EQ.
L L L L L Store the settings
1 Make the settings.
2 Press and hold [SHIFT]+[CSM].
L L L L L Recall the settings
The unit recalls the settings when you play the disc again.
•
The settings are replaced if you change them.
•
When you store settings for a 31st disc, the earliest settings
disappear.
•
Press [SHIFT]+[CSM] while “CSM” is lit and the settings return to
those that were on before the settings are recalled.
•
Press [SHIFT]+[CSM] while “CSM” is out and you are playing a
disc for which you stored settings and those settings are recalled.
Balance
You can adjust the balance of the front speakers.
1 Press [SHIFT]+[CH SEL] to select “L” or “R”.
2 Press [/
/ / / /, - - - - -].
•
When testing signal, you can also adjust the “L” or “R” balance of
the front right and left speakers by pressing [/, -].
Super Surround
VK90D VK80D
Add surround effects to stereo sound.
Press [SHIFT]+[S.SRND].
Each time you press the button:
MUSIC
→
MOVIE
→
STEREO SOUND
MUSIC: Adds surround effects to stereo sources.
MOVIE: Use this mode when playing movie software.
•
You can adjust the volume of the surround speakers to get the
best surround effect (A page 28, Speaker level adjustments).
Note
•
Turn Super Surround off when playing a DVD recorded with Dolby
Digital or DTS. The surround effects will not be reproduced
correctly if this is left on.
•
Dolby Pro Logic (A page 28) switches off.
Advanced Surround
VK70D
RAM DVD-V VCD
Enjoy a surround-like effect when using 2 front speakers (SP) or
headphones (HP). The effect broadens when playing discs with
surround effects and sound seems to come from speakers on either
side of you.
Press [ADVANCED SURROUND].
Each time you press the button:
ADV SURR 1: Natural effect
ADV SURR 2: Emphasized effect
SURR OFF: Cancel (factory preset)
•
Use the Audio Menu (A page 24) to change the SP/HP mode.
Optimum seating position
<When using television’s
speakers>
Distance A=Television’s width
•
This does not work or has less
effect with some discs.
•
Turn off if it causes distortion.
•
Do not use in combination with
surround effects on other
equipment.
A
Speaker Speaker
3 to 4 times
distance A
Seating position
RQT7125(29-35)-6 6/ 5 /03, 11:46 AM 29