Phase Technology RS1001i-II - Manual

© 2007 SoundTube Entertainment, Inc. All rights reserved. PN TS-RS801 REV 12.05.07
Key Features
• One 254 mm (10.0 in) polypropylene
woofer mounted to a proprietary cast-
aluminum M8 ™ baffle and heat sink.
• Weatherized components for indoor
& outdoor applications.
• Includes hanging hardware with aircraft
cables and integrated SpeedClamp ™
self-locking cable grip for fast, easy &
secure installation.
• Patented ZeroReflection ™ enclosure tech-
nology for optimal sound reproduction
& cabinet rigidity. Also includes Eurob-
lock connector & terminal weather boot.
• Easy access 5-position selectable tap
switch for 25, 70.7 and 100 Volt applica-
tions with 4 Ohm bypass simplifies
ordering and inventory tracking.
• Iridite-plated steel grille with protective
powder-coated finish for lasting durability.
• 93.5 dB Sensitivity offers high-output
capabilities & reduced amplification costs.
• UL 1480 rev. 5, CE approval (EMC Direc-
tive 89/366/EEC, EN55020, EN55013), Mil-
spec 810 & IEC529 approval pending.
• High-quality black or white paint finish.
Custom paint colors optional.
Description
The RS1001i-II is a 10” subwoofer with
an open-ceiling enclosure design that
delivers additional low-end response (40
Hz) for satellite/subwoofer applications.
The RS1001i-II speaker design incorporates
a low-profile grille, 5-position tap switch
with voice coil/4 Ohm direct. Hanging
hardware is included & features Speed-
Clamp ™ self-locking cable grip for fast,
easy & secure installation.
Applications
Designed for indoor & outdoor back-
ground subwoofer applications, the
RS1001i-II includes a single point mount-
ing system for rapid open-ceiling installa-
tions. True low-end response (40 Hz) and
high sensitivity (90.5 dB 1W/1M) make
the RS1001i-II ideal for additional bass
response in retail, restaurants and other
open-ceiling subwoofer applications.
RS1001i
-
ll
Open-Ceiling Speaker
Technical Information for System Engineers
SoundTube continually develops new product innovations and improvements. Updates to existing
products without prior notice are an example of SoundTube’s drive for constant improvement.
Specifications: RS1001i-II
System Type
Impedance (nominal) 1
Sensitivity dB @ 2.83V/1M
Sensitivity dB @ 1W/1M
2
Distance Factor
Frequency Response (- 3 dB)
3
Frequency Response (-10 dB) 3
Max. Program Power 4
Max. Continuous Power RMS 5
Max. UL program power
Max. Power SPL @ 1 M
6
Max. SPL @ x% distortion 7
Coverage Angle (-6 dB @ 2 kHz)
Coverage Angle (-6 dB @ 10 kHz)
Directivity Factor (Q)
Directivity Index (DI) dB
Tap Selector
Transducer - Low Frequency Driver
Transducer - High Frequency Driver
Low Frequency Voice Coil
Crossover Frequency
Network Type: Low Pass
Network Type: High Pass
Enclosure Material
Motor-board
Grille
Inputs
Colors
Height (SM = Height)
Diameter (SM = Width)
Weight
Shipping Weight
Accessories
Included
Packaging
10” Subwoofer, open-ceiling, ported (150 Watt optional
transformer for 25/70.7/100 Volt or 4 ohm direct)
4 ohm
93.5dB
90.5dB
N/A
53 Hz - 120 Hz
40 Hz - 300 Hz
300w
150w
100w
112.5dB
N/A
N/A
N/A
N/A
N/A
5-Position rotary switch with 4 ohm direct
1 x 254mm (10in) Polypropylene cone, butyl rubber surround
N/A
35.0mm 1.38in
100.0 kHz
6dB per octave, 1st order
N/A
Injection molded ABS, glass fiber reinforced
N/A
Iridite-plated steel with powder-coat finish
4 Pin, 5mm Euroblock for individual or daisy chain connection
Black or white
17.23 in / 437.6 mm
14.82 in / 376.4 mm
27.0 lb / 12.3 kg
32.5 lb / 14.8 kg
Hanging hardware, Euroblock connector & terminal
weather boot
1 per box
Transformer Taps
70.7 V Output
100 V Output 25 V Output
Impedance listed per IEC 60268-5 with
a minimum less than 80% the nominal
impedance
1w1m sensitivity determined using nominal
impedance
Frequency response measured in half or
full space as dictated by speaker mounting
configuration
Max program power is 3 dB above max
continuous power
Continuous power rating, EIA-426-B test
Max output based on max continuous power
Max useable SPL based on testing
by NWAA Labs
1
2
3
4
5
6
7
150w 112.5dB
75w 109.5dB
38w 106.5dB
19w 103.5dB
150w 112.5dB
75w 109.5dB
38w 106.5dB
19w 103.5dB
9.5w 100.5dB
4.8w 97.5dB
2.4w 94.5dB