Pacific Digital MF-810S - Manual (Page 8)

Copyright© 2002-2003 Pacific Digital Corporation
Page 5
4. Getting Started
The following sections provide step-by-step instructions on setting
up your MemoryFrame for the first time.
4.1 Unpacking your MemoryFrame™
In the retail box, the MemoryFrame unit is wrapped in a cardboard
shock-absorbent holder. DO NOT RIP the plastic “shrink-wrap”
portion when removing the unit. Instead, remove the entire
cardboard shock-absorbent holder from the box, and unfold the
cardboard so that it lies flat. After unfolding the cardboard, you can
gently slide the MemoryFrame from out of the “shrink-wrap”
material. Next refold the cardboard shock-absorbent holder and
place it back in the retail box. Save the box so you can pack or store
the unit in the future.
The MemoryFrame MF-810 retail pack includes:
• MemoryFrame™ Electronic USB Digital Picture Frame
• Wood 8x10 decorative frame (may be already attached to unit)
• External power supply with cable
• USB Cable (2 meters)
• Digital PixMaster™ PC compatible photo slideshow software
and USB Drivers on CD-ROM
• This Users Manual
• Mail-in registration/warranty card (inserted into manual)
If something is missing from the above list, contact customer service
at the following phone number
North America: 888-999-0732 or 949-252-1111
Europe: +353-61-702029
4.2 Registration & Your Product Serial Number
Please record the model and serial number from the bar coded label
located on the rear of the MemoryFrame to keep for reference. The
serial number is required for Technical Support and Product
Registration. See Figure 1 for location of model and serial number.