Philips Cell Phone - Manual (Page 8)

Getting Started 7
If you enter an incorrect PIN code three times, your
SIM card will be blocked. To unblock it, you must
request the PUK code from your operator.
When you switch on your mobile phone with your
new SIM for the first time, you will be asked for the
following:
Charging the battery
Your phone is powered by a rechargeable battery. A
new battery is partially charged and a sound alert will
warn you when the battery reaches low, if the battery
alert is
On (see “Display” on page 50).
Once the battery and battery cover are back in place,
you can charge the phone. Pull away the protective
rubber cap covering the charger connector. Plug in the
connector as shown below. Then plug the other end
into a main AC power socket.
The battery symbol indicates the state of charge.
During charging, the charge indicators will scroll; it
takes around 4 hours to fully recharge your mobile
phone. When all the scroll bars are steady, the battery
is fully charged. You can then disconnect the charger.
Depending on the network and condition of use, talk
time goes up to 8 hours and stand-by time up to 1
month.
Keeping the charger plugged to the mobile phone
when the battery is fully charged will not damage the
battery.
Set date To set the current date.
Set time To set the current time.
See “Settings” on page 49 for details on these two
items.