Pioneer DVD-U04S - Manual (Page 8)

8
<DRC1126>
En
6 Audio output
This is a connector for output of analog audio.
As a Molex 70553 type connecter is used, select a matching connection cable.
7 Function switch
Use the accessory short-circuit sockets to set the SCSI ID number and the drive
function.
÷ ON :
put a short-circuit socket
÷ OFF :
open
#1 ~ 3 : SCSI ID
#4 : Reserved
#5 : SCSI Terminator
ON = SCSI termination enable
OFF = SCSI termination disable
#6 : Default sector size
ON = 512 bytes
OFF = 2048 bytes
#7 : Disable the eject switch
ON = Disables the eject switch
OFF = Enables the eject switch
#8 : Reserved
8 SCSI interface
This is a 50-pin I/O connector according to the SCSI-2 specifications. Use a flat
ribbon SCSI connector to connect to the SCSI host adapter.
9 DC Input
This is the power supply input for DC +5 V and +12 V.
A HARDWARE TOUR
REAR VIEW
Fig. 2
6 7
4 1 8
49
50 1
1
2 +5 G G +12
DC INPUT
9 8
Setting switch
SCSI-ID
0 1 2* 3 4 5 6 7
0 (LSB) (#1) OFF ON OFF ON OFF ON OFF ON
1
(#2) OFF OFF ON ON OFF OFF ON ON
2 (MSB) (#3) OFF OFF OFF OFF ON ON ON ON
* The factory setting is ID No. 2.
8 7 6 5 4 3 2 1
DISABLE EJECT
2048/512 TERMINATION (SHORT – ON)
RESERVED
SCSI ID
2 1 0
Switch #
RESERVED