Pioneer DVR-330-S - Manual (Page 36)

Recording 05
36
En
3 Use / / / to move the cursor to the
recording start date and time on the grid.
• You can move the cursor forward or back an hour at
a time using the and buttons.
Each row of the grid is one day (you can set the timer
recording for up to a month in advance). Each column is
a 15 minute interval.
The darker area represents time that has already passed
and can’t therefore be selected. The lighter area is time
that’s available.
4 Press ENTER to set the start time.
The start date and time is displayed in the middle of the
screen.
• You can go back and reset the start time if you need
to by pressing RETURN .
5 Use the / to move the cursor to the
recording end time on the grid.
As you move the cursor around the grid, an arrow
stretches from the start time to the current cursor
position, representing the length of the recording. A
recording of up to six hours can be set.
6 Press ENTER to set the end time.
7 Select ‘Yes’ to set the timer recording and exit, or
‘No’ to go back to the timer recording screen.
• You can check the timer recording details you just set
from the main timer recording screen (see Setting a
manual timer recording on page 37).
Timer recording using the G-Code™
programming system
This system makes programming timer recordings very
simple. Most TV guides publish G-Code programming
numbers with their program details. If you want to make
a timer recording of a program, you just input the
corresponding code. The date, start, stop and channel
settings are made automatically. All you have to do is tell
the recorder the recording mode, and whether it’s a
once-only recording or a regular recording.
Note that if the country setting is incorrect (set in the
Setup Navigator), timer recordings made using the G-
Code programming system may not work as expected.
1 Press ‘G-Code’ to display the G-Code program
screen.
You can also access this screen from the Home Menu
(press
HOME MENU , select Timer Recording , then
G-Code ).
• Use the number buttons to enter the G-Code
programming number. (To clear the last digit
entered, press
CLEAR .)
Easy Timer Recording
Pr 7
SAT
1/01 11:45
CHANNEL +/– SP REC MODE
8:00 9:00 10:00 11:00 12:00 13:00 14:00
– ––:––
1/01
2/01
3/01
Current time
Recording start time
Easy Timer Recording
Pr 7
SAT
1/01 11:45
CHANNEL +/– SP REC MODE
11:00 12:00 13:00 14:00 15:00 16:00 17:00
– 13:45
1/01
2/01
3/01
Recording start time
Recording end time
HOME
MENU
CLEAR
ENTER
CLEAR
CH
REC MODE
ì
G -CODE +
G-Code#
1 3
4 5 6
7 8 9
0 Clear Enter
Cancel
2
DVR-330_RL.book 36 ページ ２００５年３月１日 火曜日 午後１０時４７分