Palsonic DVD9200 - Manual (Page 17)

CURRENT PASSWORD: Enter the current password. If the
password is incorrect, the parental option will not be changed.
OLD PASSWORD: Enter the OLD password. (Factory setting is
1369)
NEW PASSWORD: Enter the NEW password. Enter 4 digits from
the remote control unit numeric buttons.
CONFIRM PASSWORD: Confirm the NEW password by entering
it again. If the confirmation is incorrect, the Password Change
Page will be displayed again.
Initial settings and specifications
Password verify page
Password change page
CURRENT PASSWORD
PASSWORD VERIFY PAGE
[ XXXX ]
OLD PASSWORD [ XXXX ]
NEW PASSWORD [ YYYY ]
CONFIRM PASSWORD [ YYYY ]
PASSWORD CHANGE PAGE
Electronical parameters
Output
Audio
characteristics
Digital audio output
Input MIC
Audio
Video
S-video
Frequency
response
S/N ratio
Dynamic range
Total harmonic
distortion
Laser
Power source
Power consumption
Signal system PAL/NTSC
Item
Wave length: 655nm: Laser power: class 1
Output level: 1 Vp-p(75 ); connector: pin jack (1 systems)
Y output level: 1Vp-p(75 ); C output level: 0.300Vp-p(75
)(PAL), 0.286Vp-p(75 ) (NTSC); connector: S-terminal
<35W
Standard requirement
AC 85-245V~, 50Hz/60Hz
Specifications and design are subject to change without prior notice.
Output level: 2Vrm (1KHz, 0 dB); connector: pin jack. 5.1ch mixed out-
put: 1 system (2 channels). 5.1ch discrete output: 1 system (5.1ch)
20Hz~20kHz
90dB
80dB(1kHz)
-65dB(1kHz)
Carton size
Weight
Handset x 1, Video cord x 1
Battery x 2 (AA, R6, UM-3 type), Audio cord x 1
8.0m
Other specifications
Accessories
Dimensions
Remote control distance
430 (W) X 255 (D) X 55 (H) mm
480 (W) X 335 (D) X 89 (H) mm
N.W.: 2.35 kg G.W.: 3.0kg
Optical digital output: optical connector;
Coaxial digital output: pin jack;
16
6.3mm jack