Philips 14 PV 202 - Manual (Page 23)

D While a programmed recording is being made, you
cannot operate your video recorder manually. If you
would like to stop a programmed recording session,
press the button
STANDBY m for more than 3
seconds.
D During recording, the red recording light at the front
of the machine ( RECORD 5 ) will be alight.
D If the end of the cassette is reached during a
recording, the TV-Video Combi will automatically
eject the cassette.
D If you forgot to insert a cassette, ’NO CASSETTE’
will appear.
D If you have inserted a cassette with erase protection
when you want to start a recording, the cassette will
be ejected automatically.
D If ’ALL TIMERS OCCUPIED’ appears on the TV
screen when you press the TIMER k button, you
have used up all the available TIMER blocks. If you
want to clear or check a programmed recording
(TIMER block), select it with
;P q or =P r .
D If the message ’DATA ERROR’ appears on the
screen momentarily, the data for the recording was
not transferred. Please check date, start time and
end time of the programmed recording
D Programme number ’E1’ is provided for recording
from external sources (via the EXT scart socket).
How to check or change a programmed
recording (TIMER)
a Press the TIMER k button on the remote control.
b Use the =P r or ;P q buttons to select the
programmed recording (TIMER) you wish to check or
change.
c Press the TIMER k button.
d Select the entry field with the QSr or SqP
button.
e Change any displayed information with the =P r or
;P q button or with the 0..9 buttons.
f Confirm with the OK button.
g Make sure that the cassette you have inserted is not
erase protected.
h Switch off using the STANDBY m button.
D The programmed recording will only function
properly, if the TV-Video Combi has been switched
off using the button
STANDBY m .
D If the TV-Video Combi is turned on a few minutes
before beginning a programmed recording or if is
being used for playback, ’PRESS OK TO START
RECORDING’ will appear on the screen.
Change cassettes if necessary.
Confirm this message with the button
OK , to
continue the programmed recording session. The
TV-Video Combi switches off during this operation.
Clearing a programmed recording (TIMER)
a Press the TIMER k button on the remote control.
b Use the button =P r or ;P q to select the
programmed recording (TIMER) which you wish to clear.
c Press the CLEAR (CL) button.
The selected programmed recording (TIMER) has now
been deleted.
d To end, press the MENU button.
21