Panasonic RQT7089-3P - Manual (Page 13)

13
RQT7089
Dis
c
ope
ra
ti
on
s
[VCD] [CD]
The disc manager allows you to choose one track or disc to play or
to play all five discs in succession.
1
While stopped
Press [DISC MANAGER] to select the
desired method.
Each time you press the button:
A--. (1-TRACK): One track play
l ;
l (1-DISC): Plays one disc.
l ;
l (ALL-DISC): Plays five discs in succession.
l ;
a--- (NORMAL): Disc manager is cancelled.
(only the current disc is played)
2
Select the disc and track.
≥ When selecting “1-DISC”, press [DISC] and [1]–[5].
≥ When selecting “1-TRACK”, press the numbered buttons.
To select a 2-digit number
Example: To select track 23: press [
S 10] ➡ [2] ➡ [3].
You can also select the track by pressing [ : ] and [ 9 ].
3
Press [ 1 ] (play).
To cancel disc manager
Press [
∫ ].
To play a track or disc repeatedly
Press [SHIFT]
i [REPEAT] during disc manager play ( ➡ page 15).
[Note]
≥ You cannot use the disc manager while “RANDOM” or “PRGM” are
on.
≥ When playing video CDs with playback control in the “1-DISC” or
“ALL DISC” mode, you can play the disc without having to operate
the disc’s menus.
≥ The disc manager skips any DVD and WMA/MP3/JPEG discs that
are loaded.
[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3] [JPEG]
During play
Press [POSITION MEMORY] to memorize a
position.
Press again to replace the position.
This position is saved even if you turn the unit off, change the source
or change discs. When you turn the unit on, reselect “DVD/CD” or
reinsert the disc whose position you memorized, “RESUME” lights
on the display. Press [
1 ] (play) to start play from the memorized
position. The position is cleared.
≥ You can memorize positions on up to five different discs at a time.
When you memorize another position, the earliest position is
replaced.
≥ This function does not work when using Disc manager.
“RESUME” lights on the display when the unit has recorded the
position at which you stopped play.
Press [
1 ] (play) to start play from that position.
≥ The position is cleared when you:
—Turn the unit off.
—Select another source or change discs.
≥ Press [ ∫ ] to clear the position.
[DVD-V]
The following message appears
immediately after you press [
1 ] (play)
when “RESUME” is displayed.
Press [
1 ] (play) while the message is
displayed and the beginning portions of
each chapter up to the current one are
played.
Full play resumes from the point where you pressed [
∫ ] or
[POSITION MEMORY].
(This feature works only within a title.)
If you do not press [
1 ] (play), the message disappears and play
starts from where you pressed [ ∫ ] or [POSITION MEMORY].
Using the disc manager Position Memory function
Resume function
Chapter Preview
Position memorized
Press PLAY to Preview Chapters
7089en.book 13 ページ ２００３年４月２８日 月曜日 午前９時２８分