Panasonic CF-Y2 - Manual (Page 19)

19
Operation
Touch Pad
Use the touch pad to move the cursor on the screen and perform computer operations.
or
Function Operation
Moving the Cursor
Tapping/Clicking
Double-Tapping/
Double-Clicking
Dragging
Vertical Scroll
Horizontal Scroll
Move the tip of your finger
lightly over the work surface.
tapping
clicking
A . Work Surface (Touch Pad)
B . Left Button
C . Right Button
Refer to [Mouse Properties] for information on basic operations other than the above.
To display [Mouse Properties], select [start] - [Control Panel] - [Printers and Other
Hardware] - [Mouse].
When using the touch pad, keep the following in mind.
• By design the touch pad is to be used with a finger tip only. Do not place any object on
the work surface or press down forcefully with sharp-pointed objects (e.g., nails) or
hard objects that can leave marks (e.g., pencils and ball point pens).
• Try to avoid having any harmful substances, such as oil, come in contact with the
touch pad. The cursor may not work properly in such cases.
NOTE
or
Two quick taps, but on the
second tap leaving your fin-
ger down (applying pressure)
and moving it on the work
surface. While holding down the but-
ton, moving your finger on
the work surface.
or
double-tapping
Trace a circle around the touch pad.
double-clicking
or
Trace a circle around the touch pad. ( “Using the
Touch Pad”)
The setup is required before using this function. (
“Using the Touch Pad”)
To scroll down To scroll up
To right-click: Can only be performed by clicking the right but-
ton.