Panasonic CQ-VW100W - Manual (Page 45)

44
45 CQ-VW100W
English
Specifications
General
¡Power supply : 12 V DC (11 V – 16 V), test
voltage 14.4 V, negative
ground
¡Current consumption : Less than 10 A (during disc
playback)
¡ Power Output : 20 W x 4 ch
(1 kHz, 1 %, 4 Ω)
¡Maximum power output : 50 W x 4 ch
¡Compatible speaker
impedance : 4
Ω
¡Video input signal : Composite video signal, 1.0
Vp-p (75 Ω)
¡Audio input sensitivity : 2 Vrms
¡Video output signal : Composite video signal, 1.0
Vp-p (75 Ω)
¡Pre-Amp output voltage : 2 Vrms
¡Pre-Amp output impedance: Less than 600
Ω
¡Dimensions (W x H x D) : 178 x 100 x 160 mm
¡Weight
: 2.3 kg
FM stereo radio
¡Frequency range : 87.5 MHz – 108 MHz
¡Usable sensitivity : 7 dB/µV
¡Stereo separation : 30 dB (1 kHz)
¡S/N ratio : 62 dB
AM radio
¡Frequency range : 531 kHz – 1 602 kHz
¡Usable sensitivity : 28 dB/µV
¡Image rejection ratio : 50 dB
Audio section
¡Output voltage/
Impedance : 2 Vrms/600
Ω
¡Frequency
characteristics : 20 Hz – 20 kHz (±1 dB)
¡Dynamic range : 96 dB (during CD playback)
¡S/N ratio : 95 dB (during CD playback)
Monitor
¡Liquid crystal panel : 7-inch wide
¡Screen dimensions
(W x H x D) : 154 x 87 x 177 mm
¡Number of pixels : 336 960 pixels (234 vertical
x 480 horizontal x 3)
¡Valid pixel ratio : Over 99.99%
¡Display method : Transparent color filter for-
mat
¡Drive method : TFT (Thin Film Transistor)
active matrix format
Note:
¡Specifications and the design are subject to modification without notice due to improvements in technology.
¡Some figures and illustrations on this manual may be different from your product.
Playable region number
This operating instruction manual is for 3 models CQ-VW100W2/CQ-VW100W3 and CQ-VW100W5.
The following table shows the playable region number for each model.
5 (ALL) CQ-VW100W5
3 (ALL) CQ-VW100W3
2 (ALL) CQ-VW100W2
Playable region number Model