Philips DVD501AT - Manual (Page 39)

Audio Settings (cont’d) 39
4
To change the PCM, DOLBY DIGITAL, or DTS settings,
press the corresponding Number button to select the
desired item, then press the Number button to choose
the setting (i.e. ON or OFF).
SETUP/AUDIO
PCM
1. 48kHz
2. 96kHz
• Audio signals are converted to 48 kHz/16 bit signals
when playing a DVD recorded with high sound quality
(48 kHz/20 bit/24 bit, 96 kHz).
• Sound is reproduced at 96 kHz if a DVD is recorded
with high sound quality. If you are playing 48 kHz discs
or if 4:3 LETTER BOX is selected, sound is reproduced
at 48 kHz.
Enter, Back Exit
5
4
SETUP MODE DISPLAY
CLEAR +10
3
6
9
0
2
5
8
1
4
7
SKIP SEARCH MODE
TITLE
ENTER
POWER
MENU
STOP
PLAY FWD REV
RETURN
A-B
REPEAT PAUSE/STILL
AUDIO SUB TITLE ANGLE
OPEN/
CLOSE
SETUP/AUDIO
DOLBY DIGITAL
1. OFF
2. ON
• Select ON when a Dolby Digital decoder is used.
Enter, Back Exit
SETUP/AUDIO
DTS
1. OFF
2. ON
• Select ON when a DTS decoder is used.
Enter, Back Exit
5
Press the SETUP button to remove the menu.