Panasonic PT-L702SDE - Manual (Page 15)

15
) ) ) ) ) Open My Computer on the Desktop, and
check that the icon for the new drive
appears.
The drive icon is the same icon as that used
for hard disks, but you can check which icon is
which by looking at the disk capacity (14.1 MB
for a 16-MB SD memory card). (The drive letter
will appear as D:, E:, F: or something similar,
depending on the computer you are using.) If
the drive capacity does not appear as shown in
the illustration at right, select the drive icon,
and then press [ALT] + [ENTER] to display the
Properties dialog box in order to check the
capacity.
Note:
B The screens shown for each of the installation steps are Windows 98
screens. The appearances of these screens will vary depending on which
version of Windows you are using. If you are prompted to select a driver at
the New Hardware screen, select Standard Windows driver and then click
OK. Refer to the Windows online help for further details.
B Operations such as deleting, copying or renaming files and creating or
deleting folders (directories) can be carried out in the same way as for a
normal hard disk. For details, refer to the documentation and help files for
the operating system being used.
B The projector can only handle DCF-compliant directories and files. If the
directories and files on the SD memory card are not DCF-compliant, the
projector will not be able to recognise them. For further details, refer to
page
19 .
Removing the SD memory card
Follow the procedure below to remove the SD memory card.
# # # # # Close all applications software which is using the SD memory card.
$ $ $ $ $ Left-click the PC Card icon ( ) in the taskbar at the bottom-right of
the screen.
Note:
B If the PC Card icon does not appear in the taskbar at the bottom-right of
the screen, click Start, point to Settings, click Control Panel and then open
PC Card. Click the Show control on taskbar check box and then click OK.
SD memory card drive
icon