Panasonic SC-PT875 - Manual (Page 15)

15
RQ
TX02
34
Getting S
tarted
Playing
Discs
Ot
her Op
era
tions
Reference
Except [DivX]
You can enhance the surround effect for low volume 5.1-channel sound.
(Convenient for late night viewing.)
Preparation
≥ To display the picture, turn on the TV and select the appropriate video
input mode.
≥ Press [r, s VOL] to adjust the volume to normal listening level.
≥ Select “TEST TONE” from “SPEAKER SETTINGS” in AUDIO menu
(B 28).
(Effective when playing 5.1-channel sound or when “ÎPLII” lights.)
Selecting sound mode
1 Select a sound mode.
Each time you press the button:
EQ:
Equalizer
SUBW LVL: Subwoofer Level
C.FOCUS:
Center Focus
2 While the selected
mode is displayed Make settings.
Refer to the following for setting details of
each sound effect.
Equalizer
You can select sound quality settings.
Each time you press [2, 1]:
HEAVY: Adds punch to rock.
CLEAR: Clarifies higher sounds.
SOFT:
For background music.
FLAT: Cancel (no effect is added).
Subwoofer level
You can adjust the amount of bass. The unit automatically selects
the most suitable setting according to the type of playback source.
SUB W 1
,# SUB W 2 ,# SUB W 3 ,# SUB W 4
^--------------------------------------------------------------------------J
≥ The setting you make is retained and recalled every time you
play the same type of source.
Center Focus
(Effective when playing audio containing center channel
sound or when “ÎPLII” lights in the main unit display.)
You can make the sound of the center speaker seem like it is
coming from within the TV.
C.FOCUS ON
,------.C.FOCUS OFF
Whisper-mode Surround
[Australia]and]N.Z.]
[Others]
(press and hold)
≥ “(( ))” lights when there is effect.
[Australia]and]N.Z.]
Each time you press the button:
[Others]
Each time you press and hold the button:
WHISPER-MODE SRD ON

WHISPER-MODE SRD OFF
SOUND
W.SRD
MIC VOL
W.SRD
Adjusting the speaker output level manually
1 Enter test tone mode.
Test tone will be output to each channel in the
following order.
LEFT, CENTER, RIGHT,
SURROUND RIGHT, SURROUND LEFT
2 Adjust the speaker level for each
speaker. (CENTER, SURROUND
RIGHT, SURROUND LEFT)
`6 dB to i6 dB (Factory preset: 0 dB)
≥ To exit the screen, press [SETUP].
To adjust speaker level during play
1 Press and hold [—CH SELECT] to select the speaker.
While the speaker channel is displayed, press [—CH SELECT].
L
# C# R# RS# LS# SW
^---------------------------------------------}
≥ You can adjust SW (Subwoofer) only if the disc includes a
subwoofer channel and “ÎPLII” is not lit.
≥ “S” appears on the main unit’s display when you have selected
“S.SRND” (B 14, Enjoying surround sound effects). In this case, you
can adjust both surround speaker levels at the same time using [3, 4].
S: `6 dB to i6 dB
2 Press [ 3] (increase) or [4] (decrease) to adjust the speaker level
for each speaker.
C, RS, LS, SW: `6 dB to i6 dB
(L, R: Only the balance is adjustable.)
To adjust the balance of the front speakers, while “L” or “R” is selected,
press [2, 1].
OK e.g.
SET
RETURN
AUDIO-SPEAKER SETTINGS-TEST TONE
SPEAKER
LEFT
CENTER
RIGHT
SURROUND RIGHT
SURROUND LEFT
TRIM LEVEL
− −
0dB
− −
0dB
0dB
EXIT : SETUP
OK
RQTX0234-B_eng.book Page 15 Thursday, February 5, 2009 10:42 AM