Panasonic KX-MB772CX - Manual (Page 55)

9. Programmable Features
55
Changing the password for
feature programming via
remote operation
{#}{
1}{5}{5}
1. {MENU} i {#}{1}{5}{5} i {SET}
2. Enter the current password. i {SET}
L The default password is “ 1234”.
3. Enter a new 4-digit password using 0–9. i {SET}
4. Enter the new password again. i {SET} i {MENU}
Note:
L If you forget your current password, “ 0101” can always be entered in step
2 to continue changing the password.
Setting the ringer pattern
{#}{
1}{6}{1}
(KX-MB772 only)
{ 1} “ A” (default)
{ 2} “ B”
{ 3} “ C”
Changing the ring count in
FAX ONLY mode
{#}{
2}{1}{0}
(KX-MB772 only)
{ 1} “ 1”
{ 2} “ 2” (default)
{ 3} “ 3”
{ 4} “ 4”
{ 5} “ 5”
{ 6} “ 6”
{ 7} “ 7”
{ 8} “ 8”
{ 9} “ 9”
Note:
L If feature #114 is set to “ NEW ZEALAND”, {1} is not available.
L If you are using the unit with an answering machine, set to more than 4
(page 45).
Setting the Caller ID list to
print automatically
{#}{
2}{1}{6}
(KX-MB772 only)
{ 0} “ OFF” (default): The unit will not print the Caller ID list, but will keep records
of the information for the last 30 callers.
{
1} “ ON”: The unit will print the Caller ID list automatically after every 30 new
calls (page 48).
Setting the recording paper
size in the paper input tray
{#}{
3}{8}{0}
{ 1} “ LETTER”: Letter size paper
{ 2} “ A4” (default): A4 size paper
{ 3} “ LEGAL”: Legal size paper
Setting the waiting time for
the power save mode
{#}{
4}{0}{3}
To set the length of time before the unit enters the power save mode.
{
1} “ 5min”: 5 minutes
{ 2} “ 15min” (default): 15 minutes
{ 3} “ 30min”: 30 minutes
{ 4} “ 1h”: 1 hour
Note:
L During the power save mode, the unit needs to preheat the fuser unit before
printing.
Holding the previous contrast
setting
{#}{
4}{6}{2}
{ 0} “ DISABLED” (default): Deactivates this feature.
{ 1} “ ENABLED”: The unit will hold the previous setting.
Note:
L The previous setting will be held individually for copying and sending faxes
(KX-MB772 only).
Setting the default operation
mode
{#}{
4}{6}{3}
(KX-MB772 only)
To select the default operation mode when the selected time of the mode timer
(feature #464) passes.
{
1} “ COPY” (default): Copy mode is selected as default.
{ 2} “ FAX”: Fax mode is selected as default.
Note:
L You cannot select the scan mode using this feature.
Feature/Code Selection