Panasonic KX-MB772CX - Manual (Page 15)

1. Introduction and Installation
15
1.7 Recording paper
The paper input tray unit can hold:
–
Up to 250 sheets of 60 g/m
2
to 75 g/m
2
paper.
– Up to 230 sheets of 80 g/m
2
paper.
– Up to 200 sheets of 90 g/m
2
paper.
L Please refer to page 84 for information on recording
paper.
L The unit is set for printing A4 size paper by
default. If you want to use letter or legal size
paper, change the setting (feature #380 on page
55).
1 Pull the paper input tray ( 1) until it clicks into place,
then pull it completely out, lifting the front part of the
tray.
2 Before loading a stack of paper, fan the paper to
prevent paper jams.
3 Load the paper, print-side up (
2).
Important:
L Push and lock the plate (
3) in the paper input
tray, if it is lifted.
4 Adjust the recording paper guides. Pinch the front
side of the recording paper guide (
4), then slide it to
match the paper size mark. Pinch the right side of
the recording paper guide (
5), then slide it to adjust
the width to the size of the recording paper.
L Make sure that the recording paper is under the
paper limit mark (
6), and the paper should not
be loaded over the snubbers (
7).
1
3
2
7
6
5
4