Panasonic KX-MB772CX - Manual (Page 51)

8. Distinctive Ring (KX-MB772 only)
51
8 Distinctive Ring (KX-MB772 only) Distinctive Ring
8.1 Distinctive Ring (Fax
Ability/Duplex ring) service
Important:
L Not available when “ MALAYSIA” is selected in
feature #114 on page 54.
This feature is only for use if you subscribe to a
Distinctive Ring pattern service from your telephone
company. For more information on the availability of
this service in your area, please contact your
telephone company before setting this feature on
your unit.
In Hong Kong, this service is called “Duplex Ring”.
In New Zealand, this service is called “FaxAbility”.
The Distinctive Ring service gives you an additional
phone number on a single telephone line, with a different
ringing pattern.
When you wish to use the additional phone number as a
facsimile telephone number, set the ring pattern
detection feature to ON. When the unit detects a call
matching the Distinctive Ring pattern, it will receive a fax
automatically.
8.2 Using two or more phone
numbers on a single telephone
line
8.2.1 Activating the Distinctive Ring
feature
1
{ MENU} i {#} i {4}{3}{0}
2 Press {1} to select “ ON”.
L Press {0} to select “ OFF”.
3
{ SET} i {MENU}
Note:
L While the Distinctive Ring feature is activated, you
cannot change the receiving mode.
How phone calls and faxes are received
If the incoming call is for the fax number, the unit will ring
with the assigned ring pattern and automatically start fax
reception.
If the incoming call is for the phone number, the unit will
keep on ringing.
L If an external telephone answering machine is
connected, set the ring count of the answering
machine to more than 2.
8.3 Using three or more phone
numbers on a single telephone
line
Important:
L Available when “ MIDDLE EAST”, “ASIA”,
“ AFRICA” or “LAT.AMERICA” is selected in
feature #114 on page 54.
You may wish to use three or more phone numbers for a
single telephone line. In order to distinguish which
number the call was addressed to, a different ring
pattern must be assigned for each number.
Example: Using three phone numbers
To use one phone number for the fax, program the ring
pattern assigned for the fax (feature #431 on page 52). In
the example, the ring pattern assigned for fax is a triple
ring, so you should program “
C” (triple ring).
Note:
L The default setting is {5} “ B-D”. The fax will respond
to all calls with ring tone patterns “ B”, “C” and “D”.
Telephone
number Ring pattern Use
012 1234 Standard ring Personal
012 5678 Double ring Business
012 9876 Triple ring Fax
Ring pattern Selection
Standard ring (one long ring) { 1} “ A”
1st ring 2nd ring
Double ring (two short rings) { 2} “ B”
1st ring 2nd ring
Triple ring (short-long-short
rings) { 3} “ C”
1st ring 2nd ring
Other triple ring (short-short-long
rings) { 4} “ D”
1st ring 2nd ring