System hardware installation – Polycom RSS 4000 User Manual
Page 4
Polycom® RSS™ 4000 Getting Started Guide – Version 6.0
2
Obtaining the Product Activation Key
Before using Polycom® RSS™ 4000, you need to activate the device.
To obtain the product activation key
1
Enter the following website address in the address bar of the browser:
d go to Polycom Resource Center Login page.
2
Enter your Email address and password in the login box, and click Sign In. If you
are a new user, click the Register for An Account link to be registered.
3
After successful login, click Service & Support>License and Product
Activation>Activation/Upgrade in the upper navigation bar on the page.
4
Follow the onscreen instructions. You will need to enter the License Number and
the Serial Number of the device. (You can find the license number and serial
number of the device from the document provided with the Polycom® RSS™ 4000
device.)
5
Click the Submit button, and then record the activation key displayed on the
page.
System Hardware Installation
To unpack the system package:
1
Check the package to ensure its completion.
2
Open the package and check the items included. The following items should be
included:
― One Polycom® RSS™ 4000 server unit
― Two power cables
― Two RJ-45 network cables
― One DB-9 serial port cable
― A CD
― A license and a user registration card
3
Take all items out of the package and check if any of them is in poor condition.
If you find damage, file a claim with the delivery carrier. Polycom is not responsible for
damage sustained during shipment of this product.
To install system hardware
1
Place the Polycom® RSS™ 4000 unit on a stable flat surface in the selected