Paradyne U8777 User Manual
Page 180
Index
IN-4
May 2002
8700-A2-GB20-40
P
Passed, self-test result, 7-8
pattern test, 8-8
payload rate
Payload Rate Mismatch status message, 7-5
performance statistics, 7-13, 7-19
DSX-1, 7-15
G.703, 7-17
Inband Management, 7-20
physical environment requirements, D-1
pin assignments
front panel, C-1
Telco 50-pin, C-3
PLD Failure, self-test result, 7-8
Port
DSL, A-22
Status, A-2, A-7, A-9
PORTS LEDs
switching between DSL and DTE, 7-25
power requirements, D-1
Primary Clock
Failed status message, 7-6
Source
Primary System Clock
Failed status message, 7-6
Reference, A-18
R
related documents, vi
remote send line loopback, 8-7
repeater loopback (RLB), 8-5
reset
ATI, 3-10
AutoRate, 3-11
device, 3-10
slot, 3-10
S
Save Configuration screen, 3-9
saving configuration option changes, 3-7
screen, function keys, 2-7
screens for user interface, 2-1
SDSL Mode, A-13
Secondary
holdover mode, A-16
System Clock failure, A-16
System Clock Reference, A-18
security, 6-1
self-test results, 7-7
Send
and Monitor 511, 8-9
Remote Line Loopback, 8-7
Set Cross Connect Mode, A-20
size of card, D-1
SNMP
enable/disable traps, A-35
Enterprise Specific Traps, A-36
general management capabilities, 1-4
limiting management access, 6-5
Link Trap Interfaces, A-36
Link Traps, A-36
NMS IP Address, A-33
Number of Trap Managers, A-35
system entries, 3-2
trap
manager IP Address, A-35
NMS destination, A-35
Source, A-23
start-up, ATI, 2-1
Status menu
Performance Statistics
status, test messages, 7-9
System
Clock options, A-15
device name fields, 3-2
LEDs, 7-24
System Options
DSL Mode, A-13
Telco-Initiated Loopback, A-14
Test Duration, A-14
Test Timeout, A-13
T
Telco-initiated
line loopback, 8-11
loopback, disabling, A-14
payload loopback, 8-11
remote line loopback, 8-12
Telnet session
access, 6-1
access level, A-29
Disconnect Time (Minutes), A-29
enable/disable, A-29
inactivity timeout, A-29
login required, A-29
options, A-28
Session Access Level, A-29