General snmp management options, A-30, Table a-13 – Paradyne U8777 User Manual
Page 126: Table a-13, general snmp, Management options, In appendix a, Configuration options, R to, Table a-13, general snmp management options, Configuration options, to
A. Configuration Options
A-30
May 2002
8700-A2-GB20-40
General SNMP Management Options
To access the General SNMP Management Options screen, follow this menu
selection sequence:
Main Menu
→
Configuration
→
Current Configuration
→
Management and Communication
→
SNMP
The Community Name and Name Access configuration options are not available if
the unit is an LTU in a DSLAM running in IP Conservative mode.
Table A-13. General SNMP Management Options (1 of 2)
SNMP Management
Possible Settings: Enable, Disable
Default Setting: Enable
Enable or disables the SNMP management features.
Enable – Enables SNMP management capabilities.
Disable – Disables SNMP management capabilities.
main/config/management/SNMP
Slot: 4 Model: 87xx
GENERAL SNMP MANAGEMENT OPTIONS
SNMP Management: Enable
Community Name 1: Public Clear
Name 1 Access: Read/Write
Community Name 2: Public Clear
Name 2 Access: Read/Write
-------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu MainMenu Exit
Save