Paradyne U8777 - Manual (Page 20)

2. Using the Asynchronous Terminal Interface
2-8 May 2002 8700-A2-GB20-40
Switching Between Screen Work Areas
Select Ctrl-a to switch between the two screen work areas to perform all screen
functions.
Procedure
To access the function key and message area below the dotted line:
1. Press Ctrl-a to switch from the screen area to the function key and message
area below the dotted line.
2. Select either the function’s designated (underlined) character or press the Tab
key until you reach the desired function key.
Example:
To save the current options, type s or S (Save ).
3. Press Enter. The function is performed.
4. To return to the screen area above the dotted line, press Ctrl-a again.
main/config/network
Slot: 4 Model: 87xx
Port: 2
NETWORK INTERFACE OPTIONS
Margin Threshold: –3db
Excessive Error Rate Threshold: 1E–5
AutoRate: Disable
DSL Line Rate: 1552
Circuit Identifier: Clear
--------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu MainMenu Exit
Save