Determining the configuration – Paradyne U8777 User Manual
Page 38
4. Cross-Connecting Ports
4-2
May 2002
8700-A2-GB20-40
Determining the Configuration
The Hotwire cross-connect system allows you to connect the DSX-1 or G.703
ports to the DSL ports in a variety of ways:
T
DS1 Bypass mode – The entire DSX-1 or G.703 interface is connected to the
DSL interface.
T
DS1 Cross-Connect mode (8777) – The entire DSX-1 interface is connected
to the DSL interface through cross-connect circuitry. Ports can be switched
through software.
T
DS1 Cross-Connect mode (8779) – The entire G.703 interface can be
connected to any DSL or G.703 interface. The entire DSL interface can be
connected to any DSL or G.703 interface through cross-connect circuitry.
Ports can be switched through software.
T
DS0 Cross-Connect mode (8777) – Any time slot of any DSX-1 interface can
be connected to any time slot of any DSL interface. Time slots can be
individually allocated for voice or data.
T
DS0 Cross-Connect mode (8779) – Any time slot of any DSL interface can
be connected to any time slot of any G.703 or DSL interface. Any time slot of
any G.703 interface can be connected to any time slot of any G.703 or DSL
interface. Time slots can be individually allocated for voice or data.
The example below shows a DS0 cross-connection between DSX-1
Ports 1 and 2. DSX-1 Port 1 is dedicated to voice and Port 2 to data.