Paradyne U8777 - Manual (Page 40)

4. Cross-Connecting Ports
4-4 May 2002 8700-A2-GB20-40
Setting the Cross-Connect Modes
To access the Set Cross-Connect Mode screen, follow this menu selection
sequence:
Main Menu
→
Configuration
→
Current Configuration
→
Cross-Connect
→
Set Cross-Connect Mode
When the screen is first displayed, all ports are set to DS1 Bypass mode. In this
example, Ports 1 and 2 have been changed to
DS0 Cross-connect , and
Ports 3 –8 have been changed to DS1 Bypass . Unassigned appears next to
Ports 1 and 2 because time slots associated with the cross-connection have not
yet been assigned.
main/config/xconnect_mode
Slot: 18 Model: 8777
CROSS-CONNECT MODE
DSX-1 Port MODE DSL Port
1 DS0 Cross-connect Unassigned
2 DS0 Cross-connect Unassigned
3 DS1 Bypass 3
4 DS1 Bypass 4
5 DS1 Bypass 5
6 DS1 Bypass 6
7 DS1 Bypass 7
8 DS1 Bypass 8
Assign_DS0s
-------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu MainMenu Exit
Save Clear_All