Paradyne U8777 - Manual (Page 63)

7. Monitoring and Troubleshooting
8700-A2-GB20-40 May 2002 7-11
Performance Statistics
Performance statistics can assist you in determining the duration of specific
conditions and provide a historical context for problem detection and analysis.
Statistics are maintained for up to 96 15-minute intervals (24 hours).
Select a port to view the performance statistics. Port 1 is the default.
Use the applicable virtual function keys to page through the intervals and clear
statistics.
T Select PgUp or PgDn to view more statistics.
T Select ClrNear or ClrFar to clear the near- and far-end statistics to zero.
T For DSX-1 and G.703 statistics, select ClrStats to clear all statistics to zero.
Limit of six Login IDs
reached An attempt to enter a new
login ID was made, and the
limit of six login/password
combinations has been
reached. 1. Delete another
login/password combination.
2. Re-enter the new login ID.
No Security Records to
Delete Delete was selected from the
Administer Login screen, and
no security records had been
defined. T No action is needed.
T Enter a security record.
Password Matching
Error – Re-enter
Password Password entered in the
Re-enter Password field of
the Administer Logins screen
does not match what was
entered in the Password
field. T Try again.
T Contact your system
administrator to verify your
password.
Please Wait Command takes longer than
5 seconds. Wait until message clears.
Test Active A test is running and no
higher priority health and
status messages exist. T Contact service provider if
test initiated by the network.
T Wait until the other test ends
and message clears.
T Cancel all tests from the Test
screen.
T Stop the test from the same
screen the test was started
from.
Table 7-4. Device Messages (2 of 2)
Device Message What Message Indicates What To Do