Polycom IP 430 SIP 2.0 - Manual (Page 6)

3
Connecting the Handset and Optional Headset
Attaching the Base
(Optional)
1. Connect the short, straight end
of the phone cord to the handset
and the corresponding longer
straight end of the cord to the
handset jack on the back of the
phone.
2. Connect the headset (optional
accessory) to the headset jack
on the back of the phone.
1. Place all cords in the recessed area
above the modular jacks as shown.
2. Align the two protrusions on the
bracket with their corresponding
holes in the phone and snap them to-
gether to lock the base to the phone.
For information on headsets,
please visit www.polycom.com
and choose the Support link.
The base unit can be attached to the SoundPoint ® IP 430 in one of two ways:
Deskmount Method