Pioneer S-DV525 - Manual (Page 76)

Additional information 13
76
En
Error Messages
Horizontal stripe noise
interference on a TV set
near the transmitter. • If there a piece of A/V equipment with an antenna near the
transmitter, move the transmitter away from the antenna input
terminal of the AV equipment.
The POWER indicator
goes out when the switch
is on or the system is in
operation.
• It is likely that the system is malfunctioning. Ask your nearest
Pioneer authorized service center or your dealer to carry out repair
work.
Problem Remedy
Message Description
Child Lock • This message appears when the front panel buttons are pressed when the
child lock feature is active. See
Child lock setting on page 65 for more on
switching on/off the child lock.
Rec Mode On • Blinks rapidly for 2 seconds when an operation is prohibited because the
Recording Mode is on (see
Recording mode on page 60).
Phones In • Blinks rapidly for 2 seconds when an operation is prohibited because
headphones are connected.
96k Stereo • Blinks rapidly for 2 seconds when an operation is prohibited because the
source is digital 88.2 or 96kHz PCM.
No Surr. SP • Blinks rapidly for 2 seconds when an operation is prohibited because there
is no surround speaker output.
Normal / Wide / Left
Side / Right Side /
W. Stereo
• Blinks rapidly for 2 seconds when an operation is prohibited due to the
wireless speaker setting.
Muting • Blinks rapidly for 2 seconds when an operation is prohibited because the
sound is muted (press the
MUTE button to turn the sound on).
Exit • Appears briefly when a menu is automatically exited after a set period of
inactivity.
SR+ Error • Appears when there is a communication problem between the unit and the
plasma display. Check all connections and retry.
XV-DV525.book 76 ページ ２００４年２月１８日 水曜日 午後２時２９分