Philips SVB106 - Manual (Page 13)

Automatic Channel Setup (cont’d) 13
2
Press the PLAY button or the STOP button repeatedly to
select CHANNEL SET UP. Then, press the F.FWD button.
3
Press the PLAY button or the STOP button repeatedly to
select MANUAL SET UP. Then, press the F.FWD button.
4
Press the Number buttons or press the PLAY button or
the STOP button repeatedly until your desired channel
number appears.
5
Press the F.FWD button or the REWIND button so that
ADD or DELETE flashes on the screen.
6
While your choice is flashing, press the COUNTER
RESET/EXIT button. The channel you added or deleted will
appear. The channel will be added or deleted, whichever was
flashing on the screen when you exited the menu.
2-3
Adding/Deleting Channels
The channels you no longer receive or seldom watch can be
deleted from the memory. You also may add new channels into
the memory. Make sure:
● The VCR is on and in VCR position. (The VCR/TV light will
appear. If it does not, press the VCR/TV button once.)
1
Press the MENU button until MENU 1 appears.
1
6
4
5
5
CHANNEL SET UP
AUTO SET UP
B MANUAL SET UP
MANUAL SET UP
CHANNEL 30 (CATV)
ADD
- M E N U 1 -
TIMER PROGRAMMING
AUTO REPEAT
[OFF]
PICTURE SELECT
B CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
AUTO SATELLITE LINK