Panduit Cougar LS9 - Manual (Page 42)

FREQUENTLY ASKED QUESTIONS
42
9. Question: If my cassette runs out during a print job, after I reinstall
another cassette, will the print job begin where it left off?
Answer: No, the print job will start over. To avoid printing duplicate
labels, you can change the printing parameters, such as the
serialization start or end, before printing.
10. Question: How many label cassettes can you print before needing to
replace the batteries?
Answer: The number of label cassettes that can be printed before
replacing the printer’s batteries depends on the label size,
label material, font size, and number of characters or tools
that you are printing. While the number of cassettes will
vary, you should typically be able to print at least 4 or 5
cassettes before replacing the batteries.
11. Question: Will the cutter blade ever get dull, and if so would the printer
need to be repaired?
Answer: The cutter blade is designed to maintain its sharpness
throughout the life of a printer. The cutter blade should be
cleaned periodically or whenever adhesive build-up appears.
If the cutter blade breaks for any reason, it should be
returned to Panduit for repair.