Porter-Cable 333 - Manual (Page 9)

9
3. Periodically remove dust
container from flange and empty
collected dust, Fig. 5.
NOTE: A slight twisting
action will ease removal and
reassembly.
Tap container lightly to remove
compacted dust. DO NOT WASH
CONTAINER. Dry compressed air
may be used to blow out
container.
C A U T I O N : We a r s a f e t y glasses while using compressed air.
CAUTION: Never run sander with dust container or dust collector
assembly removed. Dust could be blown into eyes.
The dust collector can be rotated around the body of the sander. It may be
used in any convenient position, Fig. 6.
The dust collector may be replaced with Accessory Hose so that tool can be
used with a remote vacuum system.
Fig. 5
FLANGE
DUST
CONTAINER
Fig. 4
DUST
COLLECTOR
NOZZLE
Fig. 6
900006 - 02-07-02.qxd 10/15/02 2:25 PM Page 9