Peavey CS 3000 - Manual (Page 17)

17
CS 3000 CS 4000 CS 4080 HZ
Slew Rate > 15V/us > 15V/us > 15V/us
Damping Factor (8 ohms) > 500:1 @ 20 Hz - 1
kHz > 500:1 @ 20 Hz - 1
kHz > 500:1 @ 20 Hz - 1
kHz
Phase Response +5 to - 15 degrees from
20 Hz to 20kHz +5 to - 12 degrees from
20 Hz to 20kHz +5 to - 12 degrees from
20 Hz to 20kHz
Input Sensitivity 1.6 volts +/- 3% for 1
kHz. 4 ohms rated power,
1.37 volts +/- 3% for 1
kHz. 2 ohms rated power 1.84 volts +/- 3% for 1
kHz. 4 ohms rated power,
1.58 volts +/- 3% for 1
kHz. 2 ohms rated power 2.25 volts +/- 3% for 1
kHz. 4 ohms rated power
Input Impedance 15 k ohms, balanced 15 k ohms, balanced 15 k ohms, balanced
Current Draw @ 1/8 power 1,540 watts @ 2 ohms,
1,000 watts @ 4 ohms,
610 watts @ 8 ohms 1,825 watts @ 2 ohms,
1,185 watts @ 4 ohms,
720 watts @ 8 ohms 1,185 watts @ 4 ohms,
720 watts @ 8 ohms
Current Draw @ 1/3 power 3,650 watts @ 2 ohms,
2,510 watts @ 4 ohms,
1,535 watts @ 8 ohms 4,535 watts @ 2 ohms,
2,975 watts @ 4 ohms,
1,835 watts @ 8 ohms 2,975 watts @ 4 ohms,
1,835 watts @ 8 ohms
Cooling Two back panel
temperature dependant
variable speed 80 mm DC
fans Two back panel
temperature dependant
variable speed 80 mm DC
fans Two back panel
temperature dependant
variable speed 80 mm DC
fans
Controls 2 front panel attenuators,
rear panel Mode switches 2 front panel attenuators,
rear panel Mode switches 2 front panel attenuators,
rear panel Mode switches
Indicator LEDs 2 DDT™ (clip limiting), 2
Signal presence, 2 Active
status 2 DDT™ (clip limiting), 2
Signal presence, 2 Active
status 2 DDT™ (clip limiting), 2
Signal presence, 2 Active
status
Protection Thermal, DC, turn-on
bursts, subsonic, incorrect
loads Thermal, DC, turn-on
bursts, subsonic, incorrect
loads Thermal, DC, turn-on
bursts, subsonic, incorrect
loads
Connectors Combi XLR & 6.3 mm
phone input, Speakon
®
and Binding Post speaker
output, 15 amp IEC mains
connector
Combi XLR & 6.3 mm
phone input, Speakon
®
and Binding Post speaker
output, 15 amp IEC mains
connector
Combi XLR & 6.3 mm
phone input, Speakon
®
and Binding Post speaker
output, 15 amp IEC mains
connector
Construction 16 ga. steel with cast front
panel and cast handles 14 ga. steel with cast front
panel and cast handles 16 ga. steel with cast front
panel and cast handles
Dimensions 88.9mm x 482.6mm x
376.3mm + 31.8mm
for rear support ears and
connectors (3.5”x19”x
14.81” + 1.25”) + (1.5”)
for handle depth 88.9mm x 482.6mm x
376.3mm + 31.8mm
for rear support ears and
connectors (3.5”x19”x
4.81” + 1.25”) + (1.5”)
for handle depth. 88.9mm x 482.6mm x
376.3mm + 31.8mm
for rear support ears and
connectors (3.5”x19”x
14.81” + 1.25”) + (1.5”)
for handle depth.
Net Weight 18.05 kg (39.8 lbs.) 19.64 kg (43.3 lbs.) 21.45 kg (47.3 lbs.)
Gross Weight 19.23 kg.(42.4 lbs.) 20.8 kg.(45.8 lbs.) 25.4 kg. (56 lbs.)
All power measurements made at 120 VAC, power transformer cold. 4 ohm power is time limited by magnetic circuit breaker.
CS ® Series SPECIFICATIONS