Panasonic X70 - Manual (Page 128)

129
Connect
Con
n
e
ct
Faxing from your computer via Infrared
You can use Infrared to connect your computer (Laptop, Notepad or PC) to your phone
without using any cables. Your phone acts as a Fax modem and it can be used for sending
and receiving Faxes.
Once set up, whenever you send a Fax from your computer it will use Infrared to connect
to your phone, then your phone will dial the Fax number.
To send and receive Faxes you must subscribe to your network operator’s Fax service.
This gives you a second phone number on which to receive incoming Faxes.
To set up your computer and phone you need to:
z Subscribe to Fax service
z Install Fax software on your computer such as WinFaxPro (www.symantec.com)
z Install the Data Connection Assistant software on your computer (See Installing the
Data Connection Assistant software on page 126.)
z Set up your computer's Fax application software to send/receive faxes via your phone.
Ensure that you select the Panasonic X70 infrared modem port in your Fax application.
USB charge data cable (EB-UCX70)
You can connect your phone to your computer with the USB charge data cable (EB-
UCX70) With this you can:
z Access the Internet from your computer, using your phone as a modem.
z Send and receive faxes from your computer.
z Download ring tones, wallpapers, phone books and other data to customise your
phone.
You should use this in conjunction with the software on the CD-ROM.
Note: Refer to the documentation on the CD-ROM, or to the Panasonic website
www.panasonicmobile.com/support/software.