POSIFLEX Business Machines JIVA TP-5700 - Manual (Page 17)

Jiva SL & Jiva EL (TP5700/5800) USER’S MANUAL 3 - 3
INSTALLING UPS BATTERY
Place the optional UPS battery in the battery compartment (shown top left).
Screw on the battery cover and route the battery cable through the base. Please enable
the UPS features in the software settings before use.
ROUTING THE CABLES
Place all the cables required for connections to the
Jiva SL & Jiva EL (TP5700/5800) series except those for
special application purposes into the cable passage. Insert
one end of the cable passage cover under the adjacent
cover plate and screw on the two
screws. Be sure not to damage any of
the cables during this operation.
Now, turn the adjustable stand assembly back to normal
orientation and arrange all cables to come out of the area for
mounting main unit from the bottom edge for ease of later
operation.
PREPARING THE MAIN UNIT
On the back of the main unit, there are 4 matching pegs and a service window.
Push open the service window in the direction as indicated in the picture, one can find
a button cell battery socket, a 1 x 3 header (JP10) with 1 jumper and a 2 x 3 header
(JP8) with 2 jumpers. Though it is possible that the contents in the service window
may change as time develops.
UPS Battery
Removed
Battery
Cover