Patton electronic 3120 - Manual (Page 156)

11 • Digital Signal Processing (DSP) Model 3120 RAS Administrators’ Reference Guide
156 DSP information window
Failed Connect (bad negotiation) (dspFailedConnectPostV8)
The number of calls that failed to after V8 modulation was completed.
Remote—Retrain (dspRemoteRetrains)
The number of times the remote modem has asked for a retrain to be done.
Remote—Renegotiates (dspRemoteRenegotiates)
The number of times the remote modem has asked for a renegotiation to be done.
Local—Retrain (dspLocalRetrains)
The number of times the local DSP has requested a retrain to be done.
Local—Renegotiates (dspLocalRenegotiates)
The number of times the local DSP has requested a renegotiation to be done.
Page Requests(dspPageRequests)
This is the number of page requests the DSP has made. The DSP does not have enough memory to hold all of
the modulation protocols. The DSP will make a page request when it needs to download a new protocol not
currently in its memory.
Debug Statistics
This portion of the DSP information window (see figure 64 on page 154) shows statistics on DSP rebooting.
The information contained within these MIB variables are subject to change without notice.
Reserved A (dspReservedA)
No assigned functionality at this time
Reserved B (dspReservedB)
No assigned functionality at this time.