Setting up your microwave, Installation – Proctor-Silex 87008 User Manual

Page 8

Advertising
background image

Setting up your microwave

Installation:

1) Remove all packing

materials and accessories.

Examine the oven for any

damage such as dents or

broken door. Do not install if

oven is damaged.
2) Select a level surface that

provides enough open space

for ventilation. Allow for 3

inches of open space next to

the sides and back of the

microwave. Allow for 12

inches of open space above

the microwave, and do not

remove the legs from the

bottom of the microwave.
3) Place the microwave as

far away as possible from

radios and televisions.

Microwave may cause

interference to these

appliances.
4) Plug the microwave into a

standard household outlet.

Check the rating label of the

microwave to ensure the

voltage and frequency are

compatible with the outlet.
5) Do not install microwave

over a range cook top or

other heat-producing

appliance. Heat can damage

the microwave and void the

warranty.

WARNING: Do not remove
MICA plate located on right hand
side of inside of microwave.

To order a replacement turntable, call TTI Appliances at 1 800 579 7990

8

Microwave 87008 Use and Care Manual: Support: 1-800-488-5080 www.ps-microwaves.com

Advertising