Panasonic DMP-B15 - Manual (Page 26)

RQT9334
(ENG)
26
Linked operations with
the TV
(VIERA Link TM “HDAVI Control TM ”)
Preparation
1 Connect this unit to your TV or amplifier/receiver with an
HDMI cable ( > 25).
2 Set “VIERA Link” to “On” (> 34). (The default setting is
“On”.)
3 Set the “HDAVI Control” operations on the connected
equipment (e.g., TV).
4 Turn on all “HDAVI Control” compatible equipment and
select this unit’s input channel on the connected TV so that
the “HDAVI Control” function works properly.
Also when the connection or settings are changed,
repeat this procedure.
When you want to leave the TV on and set only this
unit to standby mode
Press [POWER Í] on this unit’s remote control and set to
standby mode.
When the following operations are performed, the television will
automatically switch the input channel and display the
corresponding action.
j When play starts on the unit
j When an action that uses the display screen is performed
(e.g., Direct Navigator screen)
j When the HDMI is connected, with the unit turned on (first
time only)
When the television is off and the following operations are
performed, the television will automatically turn on and display
the corresponding action.
j When play starts on the unit
j When an action that uses the display screen is performed
(e.g., Direct Navigator screen)
All connected equipment compatible with “HDAVI Control”,
including this unit, automatically turns off when you switch the
television off.
≥This unit automatically turns off even during playback or any
other operation.
≥When [1] (PLAY) is pressed on this unit for “Automatic input
switching” or “Power on link”, the playback image is not
immediately displayed on the screen and it may not be
possible to watch the contents from where playback started.
In this case, press [
:] or [6] to go back to where
playback started.
Playing music continuously even after turning off
power to the television (
> 22)
When not using “HDAVI Control”
Set “VIERA Link” in the Setup menu to “Off”. ( > 34)
What is VIERA Link “HDAVI Control”?
VIERA Link TM is a new name for EZ Sync TM .
VIERA Link “HDAVI Control” is a convenient function that
offers linked operations of this unit, and a Panasonic TV
(VIERA) or amplifier/receiver under “HDAVI Control”.
You can use this function by connecting the equipment
with an HDMI cable. See the operating instructions for
connected equipment for operational details.
≥VIERA Link “HDAVI Control”, based on the control functions
provided by HDMI which is an industry standard known as
HDMI CEC (Consumer Electronics Control), is a unique
function that we have developed and added. As such, its
operation with other manufacturers’ equipment that
supports HDMI CEC cannot be guaranteed.
≥This unit supports “HDAVI Control 4” function.
“HDAVI Control 4” is the newest standard (current as of
December, 2008) for Panasonic’s HDAVI Control compatible
equipment. This standard is compatible with Panasonic’s
conventional HDAVI equipment.
≥Please refer to individual manuals for other manufacturers’
equipment supporting VIERA Link function.
Automatic input switching
Power on link
Power off link
DMPB15P-RQT9334_eng.book 26 ページ ２００９年３月２８日 土曜日 午後２時３９分