Pioneer AVR-W6100 - Manual (Page 24)

23
Operating the Setup Menu
Output Setting
You can set video and audio output from the RCA output.
CAUTION
Never position the display connected to the RCA output jack, driver can
view the picture while the vehicle is moving.
1. Display a menu screen and select [SUB SOURCE SETTING] menu.
(Refer to page 19.)
2. Select the desired source.
Each press of the CH button selects the desired source in the following order:
[AUTO]
= [TV] = [VIDEO1] = [VIDEO2] = [VIDEO3] = Exit to [AUTO]
Notes:
• In the following cases, the SUB source will not change:
* When a product corresponding to each source is not connected to this product.
* When the [VIDEO2] and [VIDEO3] is set to OFF. (Refer to page 22.)
* If you do not use [TV] together with a separately sold GEX-6100TV TV tuner, switching is not
possible.
• [AUTO] outputs video displayed in this product’s display and audio.
• Use the remote control’s
2/3 buttons to select a source.
S E L E C T
SUB SOURCE A U TO
S U B S O U R C E S E T T I N G