Pitney Bowes PostPerfect B700 - Manual (Page 53)

4-18 SV60941 Rev. B
Menu 18:
Move Clock
Ahead
and
Menu 19:
Move Clock Back
Use these menus to adjust the meter's clock.
1. The display prompts “Move Ahead Clock?” or “Move
Back Clock?” depending on the menu you're in.
2. Press Yes.
3. The display prompts “Now XX:XXa(p) Press Enter”
where XX:XX is the current time displayed by the me-
ter's internal clock. For example:
Now 11:34p
Press Enter
4. Press Enter.
5. The display prompts: “Enter Mins To Advance” or “Enter
Mins To Set Back,” depending on which menu you're in.
6. Key in the number of minutes you want to either ad-
vance or set back the clock. You can adjust the clock up
or down by a maximum of 120 minutes. If you enter a
value the meter can't accept, the display prompts “Error,”
leaves the time unchanged and lets you start over.
NOTE: Once you’ve moved the clock ahead or back, you no
longer have the full adjustment range of 120 minutes. The
range is reduced by previous adjustments. For example, if
you set the clock back by 30 minutes, the adjustment range
remaining is 90 minutes (120-30=90).
7. Press Enter.
8. The meter prompts “Now XX-XXa(p) Press Enter” again.
If the setting is OK, press Enter. The meter automatically
goes to the next item in the setup menu. If you want to
change the setting, press C (Clear) to return to the menu
prompt.
4 • Setting Up the Meter