Patton electronic SMART-DTA 07MSDTA-QS - Manual (Page 5)

Smart-DTA Quick Start Guide 5
4.0 Start the SmartNode Discovery Tool
1. Insert the CD included with your Smart-DTA into the CD drive on your PC.
2. Copy the file named SNDiscovery.exe from the CD to your PC.
3. At your PC, double-click the SNDiscovery.exe file name to activate the tool. The SmartNode Discovery Tool
window will display the IP Address, MAC Address, Device Type (model number) and Build (software
release) of your Smart-DTA.
If your Smart-DTA does not appear:
• Make sure the Smart-DTA and your PC are on the same routed subnet
• Make sure any firewall programs on your PC are disabled
5.0 Access the Web Browser (GUI) Interface
1. In the SmartNode Discovery Tool window, select the line that displays the IP address of your Smart-DTA.
Figure 2. SmartNode Discovery Tool window