Palsonic DVD2060DX - Manual (Page 20)

19
REFERENCE
General Audio Dolby Video Preferences
Dual Mono
Dynamic
- - Dolby Digital Setup - -
Set Drc OFF
FULL
3/4
1/2
1/4
OFF
General Audio Dolby Video Preferences
Dual Mono
Dynamic Stereo
L-Mono
R-Mono
Mix-Mono
- - Dolby Digital Setup - -
Dual Mono (1+1) Setup
General Audio Dolby Video Preferences
Yuv
Low
00
00
Component
Scan Mode
Sharpness
Brightness
Contrast CVAS
Yes
Video Setup Page
Component
General Audio Dolby Video Preferences
Yuv
Low
00
00
Component
Scan Mode
Sharpness
Brightness
Contrast
Video Setup Page
Brightness
General Audio Dolby Video Preferences
Yuv
Low
00
00
Component
Scan Mode
Sharpness
Brightness
Contrast
High
Medium
Low
Video Setup Page
Sharpness
4.3 SHARPNESS
3.1 DYNAMIC
DUAL MONO: If your amplifier/decoder has
Dolby Digital output,you may select stereo, left
mono,right mono, or mixed mono mode for your
amplifier decoder.
DYNAMIC: This function is generally used when
playing high volume programs at night, in order
not to disturb the neighbour. This setting can dyna-
mically lower the volume and still keep the original
tone quality, This is the range, measured in deci-
bels(dB), between the loudest and the quietest
sound registers in a sound track.
COMPONENT: Sets the video output.
SHARPNESS: Sets the sharpness level of video
output.
BRIGHTNESS: Sets the brightness level of video
output.
Press right button the TV will display below.
4.4 BRIGHTNESS
4.1 COMPONENT
4. VIDEO SETUP PAGE
3. DOLBY DIGITAL SETUP PAGE
3.1 DUAL MONO
4.3 TV MODE SETUP PAGE
TV MODE: Sets the scan mode of your TV.
If there are picture interferences or no picture
please press “V.MODE” to correct it.
General Audio Dolby Video Preferences
Yuv
Low
00
00
Component
Scan Mode
Sharpness
Brightness
Contrast
P-Scan
Interlace
Video Setup Page
Set P-Scan On/Off