Pioneer Super Tuner III D DEH-P8950BT - Manual (Page 23)

Black plate (23,1)
# If a Bluetooth audio player has not been con-
nected to this unit yet,
Connection open,
Connect audio, Auto connect and Device info.
appear in the function menu and other functions
are not available.
# To return to the playback display, press BAND.
# If you do not operate functions except for
Connection open, Disconnect audio and
Connect audio within about 30 seconds, the dis-
play is automatically returned to the ordinary dis-
play.
Note
Depending on Bluetooth audio players connected
to this unit, function operations may not be cor-
rectly operated.
Connecting a Bluetooth audio
player
Putting the unit in Connection open mode al-
lows you to establish a Bluetooth wireless con-
nection from your Bluetooth audio player. You
may need to refer to the operation manual that
came with your Bluetooth audio player if you
are unsure how to initiate a connection from
your audio player.
1 Use MULTI-CONTROL to select
Connection open in the function menu.
2 Press MULTI-CONTROL to open the con-
nection.
Always waiting is displayed. This unit is now
on standby for connection from Bluetooth
audio player.
If your Bluetooth audio player is set ready for
Bluetooth wireless connection, connection to
this unit will be automatically established.
Note
Before you can use audio players you may need
to enter the PIN code into this unit. If your player
requires a PIN code to establish a connection,
look for the code on the player or in its accompa-
nying documentation. Enter the PIN code refer-
ring to Entering PIN code for Bluetooth wireless
connection on page 46.
Disconnecting a Bluetooth
audio player
1 Use MULTI-CONTROL to select
Disconnect audio in the function menu.
2 Press MULTI-CONTROL to disconnect
the Bluetooth audio player.
Disconnected is displayed. The Bluetooth
audio player is now diconnected from this
unit.
Connecting the most recently
connected Bluetooth audio player
This unit searches for a Bluetooth audio player
in the detectable area. Furthermore, this unit
automatically connects the most recently con-
nected Bluetooth audio player.
1 Use MULTI-CONTROL to select
Connect audio in the function menu.
2 Press MULTI-CONTROL to connect the
Bluetooth audio player.
While connecting,
Connecting is displayed.
After the connection is completed, Connected
is displayed.
Playing songs on Bluetooth
audio player
1 Use MULTI-CONTROL to select Play in
the function menu.
2 Press MULTI-CONTROL to start play-
back.
Stopping playback
1 Use MULTI-CONTROL to select Stop in
the function menu.
<CRD4206-A/N>23
Operating this unit
En
23
English
Section
02